248-250-8937
519-999-9723
+1 844 686-0671
WEDM Clamping Screw Stainless Steel M8*1.25, H=70mm
Rapid Holding Systems WEDM Precision Stainless Steel Clamping Screw M8*1.25, H=70MM for All Kinds of Machining Parts. Height of clamping screw can be adjusted in terms of different thickness of machined parts, which is convenient and reliable.Supplied as a set of 5.
$190.00
Add to cartWEDM Clamping Screw Stainless Steel M8*1.25, H=50mm
Rapid Holding Systems WEDM Precision Stainless Steel Clamping Screw M8*1.25, H=50MM for All Kinds of Machining Parts. Height of clamping screw can be adjusted in terms of different thickness of machined parts, which is convenient and reliable.Supplied as a set of 5.
$190.00
Add to cart
WEDM Clamping Jack Stainless Steel
Rapid Holding Systems WEDM Clamping Jack Stainless Steel. Height can be adjusted to extend up to 15mm on base height of clamp.Available base sizes 60mm and 80mm
$120.00
Add to cart
System 3R 3R-29.1 compatible Pallet 150x150 mm
System 3R 3R-29.1 compatible Pallet 150x150 mm unhardened Maxi
System 3R 3R-29.1 compatible Pallet 150x150 mm unhardened Maxi - Flushing connection. - Unhardened. - Flushing duct. - Weight 4.4 kg.
$1,550.00
Add to cart
Erowa ER-115657 compatible Pallet Ø 115 MS
Erowa ER-115657 compatible Pallet Ø 115 MS
Version Steel, rust-resistant. With centering plate 100. Application To accommodate electrodes, workpieces and fixtures for chip-cutting production. Fitting a blank Through the pallet with M8 bolts or through the blank with M10 bolts.
$1,875.00
Add to cart
FCS compatible Pull down Clamping Module 40, double
FCS compatible Pull down Clamping Module 40, double. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$541.20
Add to cart
FCS compatible tapered clamping screw M16
FCS compatible tapered clamping screw M16. for clamping module?80. size:31.5X65.5mm Workpiece is clamped by pulling in clamping screws. 0.005mm repeatability is achieved by taper-face dual contact of the clamping pin and the workpiece
$52.80
Add to cart
FCS compatible tapered clamping screw M12
FCS compatible tapered clamping screw M12. for clamping module 60. size:23.6X50mm Workpiece is clamped by pulling in clamping screws. 0.005mm repeatability is achieved by taper-face dual contact of the clamping pin and the workpiece
$49.50
Add to cart
FCS compatible tapered clamping screw M8
FCS compatible tapered clamping screw M8. for clamping module 40. size:15.8X32.5mm Workpiece is clamped by pulling in clamping screws. 0.005mm repeatability is achieved by taper-face dual contact of the clamping pin and the workpiece
$49.50
Add to cart
FCS compatible Pull down Clamping Module 80X200mm, double
FCS compatible Pull down Clamping Module 80X200mm, double. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$1,060.40
Add to cart
FCS compatible Pull down Clamping Module 80X160mm, double
FCS compatible Pull down Clamping Module 80X160mm, double. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$572.00
Add to cart
FCS compatible Pull down Clamping Module 80, Single
FCS compatible Pull down Clamping Module 80, Single. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$623.70
Add to cart
FCS compatible Pull down Clamping Module 60, double
FCS compatible Pull down Clamping Module 60, double. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$647.90
Add to cart
FCS compatible Pull down Clamping Module 60, Single
FCS compatible Pull down Clamping Module 60, Single. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$569.80
Add to cart
System 3R 3R-294.1 Compatible Vice 1-17 mm
System 3R 3R-294.1 Compatible Vice 1-17 mm
Rapid Holding Systems' Vice 1-17 mm is compatible with System 3R 3R-294.1 and is for clamping workpieces up to 17 mm `
$1,650.00
Add to cart
System 3R 3R-SP15055 Manual Compatible With Ground Flange
System 3R 3R-SP15055 Manual Chuck Compatible With Ground Flange
System 3R 3R-SP15055 Manual Chuck Compatible. Cast chuck with ground flange for installation in fixture/plate. Required drawbar 3R-605.2. Tightening torque 6 Nm. Fixed index positions 4x90°. Flushing connection
$1,125.00
Add to cart
System 3R Compatible 3R-610.21 Manual chuck Macro
System 3R Compatible 3R-610.21 Manual chuck Macro
System 3R Compatible 3R-610.21 Manual chuck Macro Three ground faces for vertical or horizontal mounting on the machine table.- Fixed index positions 4x90° - Required drawbar 3R-605.2 - Flushing duct
$1,421.00
Add to cart
System 3R 3R-610.21-S Manual chuck CNC MacroStandard
System 3R 3R-610.21-S Manual chuck CNC MacroStandard
System 3R 3R-610.21-S CNC Manual chuck MacroTwo ground faces for vertical or horizontal mounting on the machine table.- Required drawbar 3R-605.2
- Tightening torque 6 Nm
- Fixed index positions 4x90°
$1,171.00
Add to cart
3R Compatible 3R-600.24-4RS Manual Chuck Macro
System 3R 3R-600.24-4RS Manual Chuck Macro
System 3R 3R-600.24-4RS Manual Chuck for Macro holder. RHS compatible version works exactly as 3R-600.24-4RS, Manual chuck, MacroHigh Performance. It Mounts on a suitable fixture. The Fixed index positions are 4x90º and required drawbar 3R-605.2RS
$1,171.00
Add to cart
System 3R 3R-610.46-3 compatible Pneumatic chuck
System 3R 3R-610.46-3 compatible Pneumatic chuck
System 3R 3R-610.46-3 compatible Pneumatic table chuck MacroHighPerformance. RHS version 3R-610.46-3 comes with integral air unit on the side. Pneumatic chuck locked/opened with air gun.- Required drawbar 3R-605.1 or 3R-605.4
- All references of hardened and ground steel
- Required air pressure 6±1 bar
- Fixed index positions 4x90º
- Air-blast cleaning of the Z-references
- Turbo locking
- Weight 4.4 kg
$3,795.00
Add to cart
System 3R 3R-600.86-30 compatible Pneumatic chuck square Macro
System 3R 3R-600.86-30 compatible Pneumatic chuck square Macro
System 3R 3R-600.86-30 compatible Pneumatic chuck square Macro - Four M6 clearance holes, 67x20 mm and four M5 clearance holes, 63x26 mm - Required air pressure 6±1 bar - Fixed index positions 4x90° - Air blast cleaning of the Z-references - Flushing connection
$2,891.00
Add to cart
System 3R Compatible 3R-600.10-30 Pneumatic Table Chuck Macro
SYSTEM 3R Compatible 3R-600.10-30 PNEUMATIC TABLE CHUCK MACRO. RHS Brand compatible 3R-600.10-30 Pneumatic Table Chuck Macro has Fixed index positions 4×90°Pneumatic chuck locked/opened with air gun. – Required drawbar 3R-605.1 and 3R-605.4 – All references of hardened and ground steel – Required air pressure 6±1 bar – Fixed index positions 4×90° – Air-blast cleaning of the Z-references – Weight 4.4 kg.
$1,813.00
Add to cart
System 3R 3R-600.10-30 Compatible Pneumatic Tablechuck MacroHP
3R-600.10-30 Compatible Pneumatic table chuck MacroHP
Pneumatic chuck locked/opened with air gun, made of stainless steel, rust-resistant. It applies to CNC machining.- Required drawbar 3R-605.1 or 3R-605.4
- Required air pressure 6±1 bar
- Fixed index positions 4x90º
- Air-blast cleaning of the Z-references
- Carbide XY-References
- Turbo locking
$3,571.00
Add to cart
System 3R 3R-600.28-S compatible Manual chuck Macro
System 3R 3R-600.28-S compatible Manual chuck Macro
System 3R 3R-600.28-S compatible Manual chuck Macro. Chuck with ground back face for mounting on the machine spindle with 3R-A26488 or in a fixture on the machine table. - Required drawbar 3R-605.2 - Fixed index postions 4x90° - Flushing connection
$2,450.00
Add to cart