248-250-8937
519-999-9723
+1 844 686-0671
FCS compatible Pull down Clamping Module 40, double
FCS compatible Pull down Clamping Module 40, double. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$541.20
Add to cart
FCS compatible tapered clamping screw M16
FCS compatible tapered clamping screw M16. for clamping module?80. size:31.5X65.5mm Workpiece is clamped by pulling in clamping screws. 0.005mm repeatability is achieved by taper-face dual contact of the clamping pin and the workpiece
$52.80
Add to cart
FCS compatible tapered clamping screw M12
FCS compatible tapered clamping screw M12. for clamping module 60. size:23.6X50mm Workpiece is clamped by pulling in clamping screws. 0.005mm repeatability is achieved by taper-face dual contact of the clamping pin and the workpiece
$49.50
Add to cart
FCS compatible tapered clamping screw M8
FCS compatible tapered clamping screw M8. for clamping module 40. size:15.8X32.5mm Workpiece is clamped by pulling in clamping screws. 0.005mm repeatability is achieved by taper-face dual contact of the clamping pin and the workpiece
$49.50
Add to cart
FCS compatible Pull down Clamping Module 80X200mm, double
FCS compatible Pull down Clamping Module 80X200mm, double. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$1,060.40
Add to cart
FCS compatible Pull down Clamping Module 80X160mm, double
FCS compatible Pull down Clamping Module 80X160mm, double. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$572.00
Add to cart
FCS compatible Pull down Clamping Module 80, Single
FCS compatible Pull down Clamping Module 80, Single. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$623.70
Add to cart
FCS compatible Pull down Clamping Module 60, double
FCS compatible Pull down Clamping Module 60, double. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$647.90
Add to cart
FCS compatible Pull down Clamping Module 60, Single
FCS compatible Pull down Clamping Module 60, Single. Rapid Holding Systems Pull Clamping System is a workholding system for 5-axis machining with precise locating repeatability of 0.005mm. Workpiece is clamped by pulling in clamping screws. Pull-down clamping allows clear tool access and enables machining from five sides, leading to better machining accuracy with a single setup. This simple mechanical system provides easy & precise positioning and clamping for 5-axis machining.
$569.80
Add to cart
System 3R 3R-294.1 Compatible Vice 1-17 mm
System 3R 3R-294.1 Compatible Vice 1-17 mm
Rapid Holding Systems' Vice 1-17 mm is compatible with System 3R 3R-294.1 and is for clamping workpieces up to 17 mm `
$1,650.00
Add to cart
System 3R 3R-SP15055 Manual Compatible With Ground Flange
System 3R 3R-SP15055 Manual Chuck Compatible With Ground Flange
System 3R 3R-SP15055 Manual Chuck Compatible. Cast chuck with ground flange for installation in fixture/plate. Required drawbar 3R-605.2. Tightening torque 6 Nm. Fixed index positions 4x90°. Flushing connection
$1,125.00
Add to cart
System 3R Compatible 3R-610.21 Manual chuck Macro
System 3R Compatible 3R-610.21 Manual chuck Macro
System 3R Compatible 3R-610.21 Manual chuck Macro Three ground faces for vertical or horizontal mounting on the machine table.- Fixed index positions 4x90° - Required drawbar 3R-605.2 - Flushing duct
$1,421.00
Add to cart
System 3R 3R-610.21-S Manual chuck CNC MacroStandard
System 3R 3R-610.21-S Manual chuck CNC MacroStandard
System 3R 3R-610.21-S CNC Manual chuck MacroTwo ground faces for vertical or horizontal mounting on the machine table.- Required drawbar 3R-605.2
- Tightening torque 6 Nm
- Fixed index positions 4x90°
$1,171.00
Add to cart
3R Compatible 3R-600.24-4RS Manual Chuck Macro
System 3R 3R-600.24-4RS Manual Chuck Macro
System 3R 3R-600.24-4RS Manual Chuck for Macro holder. RHS compatible version works exactly as 3R-600.24-4RS, Manual chuck, MacroHigh Performance. It Mounts on a suitable fixture. The Fixed index positions are 4x90º and required drawbar 3R-605.2RS
$1,171.00
Add to cart
System 3R 3R-610.46-3 compatible Pneumatic chuck
System 3R 3R-610.46-3 compatible Pneumatic chuck
System 3R 3R-610.46-3 compatible Pneumatic table chuck MacroHighPerformance. RHS version 3R-610.46-3 comes with integral air unit on the side. Pneumatic chuck locked/opened with air gun.- Required drawbar 3R-605.1 or 3R-605.4
- All references of hardened and ground steel
- Required air pressure 6±1 bar
- Fixed index positions 4x90º
- Air-blast cleaning of the Z-references
- Turbo locking
- Weight 4.4 kg
$3,795.00
Add to cart
System 3R 3R-600.86-30 compatible Pneumatic chuck square Macro
System 3R 3R-600.86-30 compatible Pneumatic chuck square Macro
System 3R 3R-600.86-30 compatible Pneumatic chuck square Macro - Four M6 clearance holes, 67x20 mm and four M5 clearance holes, 63x26 mm - Required air pressure 6±1 bar - Fixed index positions 4x90° - Air blast cleaning of the Z-references - Flushing connection
$2,891.00
Add to cart
System 3R Compatible 3R-600.10-30 Pneumatic Table Chuck Macro
SYSTEM 3R Compatible 3R-600.10-30 PNEUMATIC TABLE CHUCK MACRO. RHS Brand compatible 3R-600.10-30 Pneumatic Table Chuck Macro has Fixed index positions 4×90°Pneumatic chuck locked/opened with air gun. – Required drawbar 3R-605.1 and 3R-605.4 – All references of hardened and ground steel – Required air pressure 6±1 bar – Fixed index positions 4×90° – Air-blast cleaning of the Z-references – Weight 4.4 kg.
$1,813.00
Add to cart
System 3R 3R-600.10-30 Compatible Pneumatic Tablechuck MacroHP
3R-600.10-30 Compatible Pneumatic table chuck MacroHP
Pneumatic chuck locked/opened with air gun, made of stainless steel, rust-resistant. It applies to CNC machining.- Required drawbar 3R-605.1 or 3R-605.4
- Required air pressure 6±1 bar
- Fixed index positions 4x90º
- Air-blast cleaning of the Z-references
- Carbide XY-References
- Turbo locking
$3,571.00
Add to cart
System 3R 3R-600.28-S compatible Manual chuck Macro
System 3R 3R-600.28-S compatible Manual chuck Macro
System 3R 3R-600.28-S compatible Manual chuck Macro. Chuck with ground back face for mounting on the machine spindle with 3R-A26488 or in a fixture on the machine table. - Required drawbar 3R-605.2 - Fixed index postions 4x90° - Flushing connection
$2,450.00
Add to cart
System 3R 3R-680.24-S Manual chuck low profile MacroMagnum Compatible
System 3R Macro Magnum 3R-680.24-S Compatible Manual chuck low profile
System 3R Macro Magnum 3R-680.24-S Compatible Manual chuck low profile. For machine spindle or machine table. – Required drawbar 3R-605.2 – Fixed index positions 4×90° – Weight 5 kg.
$2,150.00
Add to cart
System 3R 3R-680.10-3 compatible Table chuck low pofile MacroMagnum
System 3R 3R-680.10-3 compatible Table chuck low pofile MacroMagnum
System 3R 3R-680.10-3 compatible Table chuck low pofile MacroMagnum For permanent mounting on the machine table. - Locking force Macro 5000 N - Locking force MacroMagnum 15000 N - Solid X- & Y-references - Required drawbar 3R-605.2 (included) - Fixed index positions 4x90° - Required air pressure 6±1 bar - Blowing-clean Z-references - Sealing ring - Turbo locking, MacroMagnum pallets
$2,850.00
Add to cart
System 3R 3R-602.10-1N Pneumatic chuck Macro Compatible
System 3R 3R-602.10-1N Pneumatic chuck Macro
System 3R compatible 3R-602.10-1N Pneumatic chuck for Macro holders. Supplied with drawbar 3R-605.10 and protective cover. - Fixed index positions 4x90° - Air-blast cleaning of Z-references - Clamping force 7000 N - Weight 1.1 kg.
$2,250.00
Add to cart
System 3R Compatible 3R-600.14-30 Macro Chuck Pneumatic Mount
3R-600.14-30 Compatible Pneumatic MacroStandard
System 3R Compatible 3R-600.14-30 Macro Chuck Pneumatic Mount. Quality System 3r Tooling RHS Brand 3R-600.14-30 Macro Chuck Pneumatic Mount for permanent mounting on the machine table. Required drawbar 3R-605.2. Required air pressure 6±1 bar.
$1,837.00
Add to cart
System 3R 3R-652.9 Manual adapter 90° Compatible, Macro-Macro
System 3R 3R-652.9 Manual chuck adapter 90° Compatible, Macro-Macro
3R-652.9 System 3r Manual Chuck Adapter 90 degree compatible. Quality System 3r Tooling RHS Brand 3R-652.9 Manual Chuck Adapter 90 degree can be mounted horizontally of macro holders and fixed index positions 4*90 degree. Short spigot is included.
$1,275.00
Add to cart