248-250-8937
519-999-9723
+1 844 686-0671
ER-078474 Erowa OEM 3 Jaw Concentric Chuck Manual ø 140mm on 148G Pallet
Version Manual 3-jaw concentric chuck ø 125 mm. Central clamping area 3-53mm. Body made of cast metal. High degree of concentricity according to DIN 6386. Includes 3 hardened drilling jaws (stepped on the outside), 3 hardened turning jaws (stepped on the inside), 1 spanner. Note Max. speed 4000 min-¹. Application As adapter chuck in the die-plate chuck PM128 II AirDock.
ER-085839 Erowa OEM Sealing Kit for Blow Off Holes (1 Chuck)
Version Copper wire silvered. Application The kit is used for sealing the blow-off holes.
ER-090744 Erowa OEM Magnetic Clamping Plate Neospark / 250x150x46
Version Magnetic clamping plate made of steel, with two lateral stop bars. Clamping power of the magnet: 100N/cm2. Prepared with 4xM8 boreholes to be fitted to pallet ø148. Application Clamping workpieces magnetically for surface and profile grinding, EDM and high-frequency milling. Recommended minimum workpiece size: 4x4xmm.
ER-093758 Erowa OEM Uniblank C EWIS, Set of 12
Version Brass holder ITS 50 without mounting boreholes. With gripper slots and sealing plate. Application To mount electrodes and workpieces of various shapes. To fit blank Drill mounting boreholes yourself according to requirements. Note Order EWISTM chip (ER-094168) and chucking spigots separately.
ER-093765 Erowa OEM Prisround C EWIS, Set of 12
Version Brass holder ITS 50 with square preparation, gripper slots and sealing plate. Including 25xM8 threaded pins. Application To mount square electrodes and workpieces with shaft sizes of up to 25mm. Mounting With threaded pins. If necessary, center with with spacer plates ER-010523. Note Order EWISTM chip (ER-094168) and chucking spigots seperatly!
ER-093774 Erowa OEM Uniholder C EWIS, Set of 12
Version Brass holder ITS 50 with 20.5mm slot, gripper slots and sealing plate. Including 25xM8 threaded pins. Application To mount electrodes and workpieces with shank sizes of up to 20 mm. To fit blank With threaded pins. If necessary, center with spacer plates ER-010532. Note Order EWISTM chip (ER-094168) and chucking spigots separately!
ER-093780 Erowa OEM Uniplate C EWIS, Set of 12
Version Brass holder ITS 50 with rear mounting option, gripper slots and sealing plate. Surface 51x51mm faced. Including 24xM6 bolts and washers. Application To mount electrodes and workpieces with a base surface of more than 50mm. To fit blank With 2 x M6 bolts. Note Order EWISTM chip (ER-094168) and chucking spigots separately.
ER-093999 Erowa OEM Collet Chuck Holder 50 C
Version System size 50, incl. wrench. Application For round material up to ø 20 mm.
ER-094046 Erowa OEM Compact ITS Adapter C
Version ITS system size 50, lock with central locking bolt. Prepared to accommodate chip holder for EWIS chip. Operation Tighten central locking bolt. Application System adapter Compact - ITS.
ER-094063 Erowa OEM Compact ITS Adapter Chuck C
Version ITS system size 50 C, QuickChuck action for Compact holders. Operation Quick locking mechanism with lever. Application Individual Compact chuck for machines which are equipped with standard ITS. System adapter Compact - ITS.
ER-094093 Erowa OEM Sealing Ring ITS 50 C for PC210
Version Aluminium anodized. Application Prevents penetration of chips and dirt into the ProductionChuck 210 Combi by application of EROWA electrode holders C. For automatic handling with gripper RN PC 210 (option).
ER-094143 Erowa OEM Sealing Ring ITS 50 C for SSF Automatic
Version Stainless steel. Application Prevents penetration of chips and dirt into the rapid action chuck by application of EROWA electrode holders C.
ER-094152 Erowa OEM Sealing Ring ITS 50 C for ITS 100P
Version Aluminium anodized. Application Prevents penetration of chips and dirt into the QuickChuck 100 P or ITS chuck 100 P by application of EROWA electrode holders C.
ER-094158 Erowa OEM Sealing Ring ITS 50 C for ITS 100P Automtatic
Version Stainless steel. Application Prevents penetration of chips and dirt into the ITS chuck 100 P by application of EROWA electrode holders C.
ER-094178 Erowa OEM Cover Set for UPC/ ITS 50 C
Version Aluminum with inserts, to protect UPC chuck when used wih holder ø72, pallet ø115, pallet ø148, electrode holders ITS 50 C.
ER-094180 Erowa OEM Centering Plate 50 C, Set of 50
Version Corrosion-resistant, including sealing plate and 4 supporting feet each. Application Small electrode weights. Mounting Mounted directly on plane surface of blank.
ER-094181 Erowa OEM Centering Plate 50 C, Set of 5
Version Corrosion-resistant, including sealing plate and 4 supporting feet each. Application Small electrode weights. Mounting Mounted directly on plane surface of blank.
ER-094955 Erowa OEM Sealing Ring ITS 50 C for Chuck 50
Version Plastic. Application Prevents penetration of chips and dirt into the ITS Chuck 50 with application of EROWA HoldersITS50 C.
ER-095124 Erowa OEM Sealing Plate 50 C, Set of 50
Version Sealing plate, stainless. Application For retrofitting existing ITS 50 holders
ER-095125 Erowa OEM Sealing Plate 50 C, Set of 5
Version Sealing plate, stainless. Application For retrofitting existing ITS 50 holders
ER-103679 Erowa OEM My First EROWA QuickChuck 100 P C
Application Starting set for newcomers, with ITS chuck on the EDM quill. Version 3 x Uniplate C 3 x Prisround C 3 x Uniblank C 6 x Setscrew M8 x 16 for Prisround 6 x Setscrew M8 x 16 for Uniholder 1 x Blank holder ø 20 mm 1 x Blank holder ø 12 mm 1 Blank holder ø 10 mm 6 x Hex bolt with slot M6 x 20 for Uniplate 1 x Checking pin 3 x Uniholder C 1 x Toolkit ITS 1 x QuickChuck 100 P with base plate 5 x Chucking spigot F/A EDM