Shop

3R compatible Chucks, RHS Extensions, System 3R Compatible

System 3R Compatible Macro Chuck 12 Inch Extension

0 out of 5

System 3R Compatible Macro Chuck 12 Inch Extension

System 3R Compatible Macro Chuck 12 Inch Extension. Quality System 3r Tooling RHS Brand Macro Chuck 10 Inch Extension comes in 6 inches, 8 inches and 10 inches, 12 inches, 15 inches.

$1,425.00

3R compatible Chucks, RHS Extensions, System 3R Compatible

System 3R Compatible Macro Chuck 4 inch Extension

0 out of 5

System 3R Compatible Macro Chuck 4 inch Extension

System 3R Compatible Macro Chuck Extension comes in 4inch, 6inchs, 8inches, 12 inch & 10inches lengthsWill customize to suit your particular and specific needs

$975.00

Erowa U-Sloted ER-009219

0 out of 5

USED EROWA U-Holder ER-009219

$10.00

Erowa Sensor with ball ø 5-6mm ER-008638 ER-010562 compatible D5/D6

0 out of 5

Erowa ER-008638 ER-010562 compatible D5/D6 Centering Sensor Stationary

EROWA ER-008638 ER-010562 D5 CENTERING SENSOR 5-6MM. Equivalent to ER-008638 and ER-010562. Holder with stationary sensing pin and tungsten carbide ball comes with 1 pc spigot. Repetition accuracy: X,Y,Z 0.002mm. Overrun protection: X, Y, Z 1 mm.

$510.00

Erowa Sensor ER-008638 ER-010562 compatible D3 Centering Sensor Stationary 3mm tip

0 out of 5

Erowa ER-008638 ER-010562 compatible D3 Centering Sensor Stationary 3mm tip

EROWA ER-008638 ER-010562 D3 CENTERING SENSOR 3MM. Equivalent to ER-008638 and ER-010562. Holder with stationary sensing pin and tungsten carbide ball comes with 1 pc spigot. Repetition accuracy: X,Y,Z 0.002mm. Overrun protection: X, Y, Z 1 mm.

$510.00

Erowa sensor ER-008638 ER-010562 compatible D2 Centering Sensor Stationary 2mm tip

0 out of 5

Erowa ER-008638 ER-010562 compatible D2 Centering Sensor Stationary 2mm tip

EROWA ER-008638 ER-010562 D2 CENTERING SENSOR 2MM. Equivalent to ER-008638 and ER-010562. Holder with stationary sensing pin and tungsten carbide ball comes with 1 pc spigot. Repetition accuracy: X,Y,Z 0.002mm. Overrun protection: X, Y, Z 1 mm.

$510.00

Erowa sensor ER-008638 ER-010562 compatible D2 Spring Loaded Centering Sensor 2mm Tip

0 out of 5

Erowa ER-008638 ER-010562 compatible D2 Spring Loaded Centering Sensor 2mm Tip

EROWA ER-008638 ER-010562 D2 SPRING CENTERING SENSOR 2MM for the Automatic measurement of workpieces in CNC EDM sinking centers. Spring Loaded Centering Sensor is compatible with EROWA ITS System. It is equivalent to ER-008638 & ER-010562. Holder with spring sensing pin and tungsten carbide ball. It applies to automatically measure specification of workpieces in CNC EDM sinking centers. Repetition accuracy: X,Y,Z 0.002mm

$1,195.00

Erowa sensor ER-008638 ER-010562 compatible D8 Spring Loaded Centering Sensor 8mm Tip

0 out of 5

Erowa ER-008638 ER-010562 compatible D8 Spring Loaded Centering Sensor 8mm Tip

EROWA ER-008638 ER-010562 D8 SPRING CENTERING SENSOR 8MM for the Automatic measurement of workpieces in CNC EDM sinking centers. Spring Loaded Centering Sensor is compatible with EROWA ITS System. It is equivalent to ER-008638 & ER-010562. Holder with spring sensing pin and tungsten carbide ball. It applies to automatically measure specification of workpieces in CNC EDM sinking centers. Repetition accuracy: X,Y,Z 0.002mm

$1,195.00

Erowa sensor ER-008638 ER-010562 compatible D6 Spring Loaded Centering Sensor 6mm Tip

5.00 out of 5

Erowa ER-008638 ER-010562 compatible D6 Spring Loaded Centering Sensor 6mm Tip

EROWA ER-008638 ER-010562 D6 SPRING CENTERING SENSOR 6MM for the Automatic measurement of workpieces in CNC EDM sinking centers. Spring Loaded Centering Sensor is compatible with EROWA ITS System. It is equivalent to ER-008638 & ER-010562. Holder with spring sensing pin and tungsten carbide ball. It applies to automatically measure specification of workpieces in CNC EDM sinking centers. Repetition accuracy: X,Y,Z 0.002mm

$1,195.00

Erowa Compatible Holders, EROWA ITS Compatible

Erowa ER-008458 compatible Stainless Steel V-block Holder

Erowa ER-008458 compatible Stainless Steel V-block Holder

0 out of 5

ER-008458 compatible Stainless Steel V-block Holder

Erowa ER-008458 V-block Holder Stainless. Suitable for clamping precision prism ground bearing, machined electrodes or small workpieces from outside.

$595.00

3r Self Centering Vices, Self Centering Vises, Standard Vises, System 3R Compatible

System 3R Self Centering Compatible Vise on 3R pallet

0 out of 5

System 3R Self Centering Compatible Vise on 3R pallet

Mini Precision 5 Axis Self Centering Vice. Clamping Maximum Work Piece Size 2.75" or 70mm. Double Self Centered with Repeating Accuracy of 0. for Vertical and Horizontal Processing Machine. Comes pre-mounted on 54mm Precision cast 3R-651.7E-P Macro pallet.

SPECIFICATION
Application	For 5 axis cnc machining use
Clamping	Maximum Work Piece Size 2.75"
Material	Stainless Steel
Accuracy	0.01mm
Version	Pre- mounted on 54mm 3R-651.7E-P Macro pallet

$925.00

System 3R 3R-901-10RS compatible 3Refix mandrel Ø10mm

System 3R Compatible

System 3R 3R-901-20E compatible 3Refix mandrel Ø20mm

0 out of 5

System 3R 3R-901-20E compatible 3Refix mandrel Ø20mm

System 3R 3R-901-20E compatible 3Refix mandrel Ø20mm, rust-resistant - 3Refix compatible Ø20 mm - Rust-resistant - Recommended tightening torque 4 Nm - Supplied singly

$150.00

System 3R Compatible

System 3R 3R-901-10E compatible 3Refix mandrel Ø10mm

0 out of 5

System 3R 3R-901-10E compatible 3Refix mandrel Ø10mm

System 3R 3R-901-10E compatible 3Refix mandrel Ø10mm, rust-resistant - 3Refix Ø10 mm - Rust-resistant - Recommended tightening torque 4 Nm - Supplied singly

$110.00

System 3R Compatible

System 3R 3R-901-10RS compatible 3Refix mandrel Ø10mm

0 out of 5

System 3R 3R-901-10RS compatible 3Refix mandrel Ø10mm

System 3R 3R-901-10RS compatible 3Refix mandrel Ø10mm, rust-resistant - 3Refix Ø10 mm - Rust-resistant - Recommended tightening torque 4 Nm - Supplied singly

$110.00

Wire EDM Tooling, Wire EDM User Kits

System 3R 3R-209-860.1 Compatible EconoRuler kit

0 out of 5

System 3R 3R-209-860.1 Compatible EconoRuler kit. Kit for clamping rectangular workpieces. 3R-209-860 compatible Ruler, 860 mm x1 3R-333-03 compatible Allen key, 3 mm x1 3R-333-05 compatible Allen key, 5 mm x1 + Accessories

$2,930.00

3R Compatible Gauging Devices, 3R Compatible probes, System 3R Compatible

SYSTEM 3R Compatible 3R-656.31 MEASURING PROBE MACRO

System 3R 3R-656.31-3P Measuring probe Ø1 mm Macro Compatible

5.00 out of 5

System 3R 3R-656.31-3P Measuring probe Ø1 mm Macro Compatible

System 3R 3R-656.31-3P Measuring probe Macro Compatible with stationary tip of 1mm tip or ball diameter. Also available in different size tips.

$1,310.00

3R Compatible Adapters, RHS Extensions, System 3R Compatible

3R Compatible 3R-652.9 90 Degree 6" Macro Chuck Adapter

3R Compatible 3R-652.9 90 Degree 6" Macro Chuck Adapter

5.00 out of 5

3R Compatible 3R-652.9 90 Degree 6" Macro Chuck Adapter. Quality System 3r Tooling RHS Brand 3R-652.9 90 Degree 6" Macro Chuck Adapter is 90 degree holder for 54MM and 70MM 3R pallets. High Quality, well-built adapter for machining or EDMing right angles. Suitable for horizontal mounting of Macro compatible holders.Requires drawbar 3r-605.2 (Short) Manual DrawbarMaximum weight of workpiece or electrode, spindle chuck or table chuck / kg

$1,580.00

Erowa Compatible Holders, EROWA ITS Compatible

EROWA ER-035154 compatible Electronic Chip holder (ABS+Steel)

0 out of 5

RHS chip with chip holder. Sleeve fitting with built-in data carrier. ∅18x18mm Material: ABS+Stainless steel.Chip: read-only. Application In any EROWA electrode holder and pallet which has been prepared for it.

$8.00

Erowa Rapid Action Pneumatic chuck chuck Used tooling

0 out of 5

Erowa OEM Manual chuck with Base Plate- UsedOriginal Erowa manual chuck with screw locking function. chuck is premounted on a base plate and can be installed directly on the machine table.condition: used and functional.

$500.00

ER-012297 ITS Rapid-Action Pneumatic Chuck on base plate

Erowa ER-012297 OEM ITS Rapid-Action Pneumatic Chuck on base plate

0 out of 5

ER-012299 Rapid-action chuck NSF on plate

Version NSF = increased clamping power up to 7000 N. Connections Pneumatic valves on side. Application: Electrode fabrication eg on magnet plate.Note: to hold pallet 115 and 148, electrode holders, with the exception of pallet with a P-profile

$500.00

Erowa ER-012297 OEM Rapid-action chuck NSF on block (Used)

0 out of 5

Erowa ER-012297 OEM Rapid-action chuck NSF on block

Version: NSF = increased clamping power up to 7000 N.

Condition: Used and working in good condition.

Connections: Pneumatic valves on side.

Application: Electrode fabrication. For use in horizontal and vertical positions.

Note

To hold pallets ø 115 / ø 148, electrode holders, with the exception of pallets with a P-profile.

$995.00

EDM Putty

DEACON Mold-Pac EDM Putty 50 lb. pail

0 out of 5

DEACON Mold-Pac EDM is a Damming, Molding, and Positioning Putty 50 lb. pail. Resistant to mineral oil and other types of dielectric fluids, can be easily and quickly removed, remains flexible, easily packed in place, Holds tight, Asbestos free. Damming compound (to hold a pool of dielectric fluid around the cutting action in an EDM process), Vibration suppression, Positioning delicate parts.

$1,647.00

EDM Putty

DEACON Mold-Pac EDM Putty 10lb

0 out of 5

DEACON Mold-Pac EDM is a Damming, Molding, and Positioning Putty. FEATURES Resistant to mineral oil and other types of dielectric fluids, can be easily and quickly removed, remains flexible, easily packed in place, Holds tight, Asbestos free. APPLICATIONS Damming compound (to hold a pool of dielectric fluid around the cutting action in an EDM process), Vibration suppression, Positioning delicate parts.

$345.00