EDM Tooling

System 3R 3R-601.3 Compatible Stainless 70mm Pallet

0 out of 5

System 3R Compatible 3R-601.3 Stainless 70mm Pallet

System 3R Compatible 3R-601.3 Stainless 70mm Pallet. Hardened with 3Refix holes, flushing connection and clearance holes for six fixing screws.

3Refix Ø10 mm
Adapted for automatic changing
Parallel-ground top and bottom faces
Fixed index positions 4x90°
Rust-resistant
Flushing duct

$387.00

3R Compatible pallets, System 3R Compatible

System 3R OEM 3R-601.52 Pallet Ø116 mm 3Refix Macro

System 3R 3R-601.52 compatible Pallet Ø116 mm 3Refix Macro

0 out of 5

3R-601.52 compatible Pallet Ø116 mm 3Refix Macro

3R-601.52 compatible Pallet Ø116 mm 3Refix Macro Hardened, with 3Refix holes and clearance holes for ten fixing screws. - 3Refix Ø10 mm. - Adapted for automatic changing. - Fixed index positions 4x90°. - Ready for code carrier. - Parallel-ground top and bottom faces. - Rust-resistant. - Flushing connection.

$725.00

3R compatible Chucks, System 3R Compatible, WEDM Chucks/Mounting Heads, Wire EDM Tooling

System 3R 3R-602.10-1 Pneumatic chuck Macro Compatible

0 out of 5

System 3R 3R-602.10-1 Pneumatic chuck Macro

System 3R compatible 3R-602.10-1 Pneumatic chuck for Macro holders. Supplied with
drawbar 3R-605.10 and protective cover.
- Fixed index positions 4x90°
- Air-blast cleaning of Z-references
- Clamping force 7000 N
- Weight 1.1 kg.

$2,250.00

3R compatible Chucks, System 3R Compatible, WEDM Chucks/Mounting Heads, Wire EDM Tooling

System 3R 3R-602.10-1N Pneumatic chuck Macro Compatible

0 out of 5

System 3R 3R-602.10-1N Pneumatic chuck Macro

System 3R compatible 3R-602.10-1N Pneumatic chuck for Macro holders. Supplied with drawbar 3R-605.10 and protective cover. - Fixed index positions 4x90° - Air-blast cleaning of Z-references - Clamping force 7000 N - Weight 1.1 kg.

$2,250.00

System 3R 3R-602.27 compatible Manual chuck Macro

0 out of 5

System 3R 3R-602.27 compatible Manual chuck Macro

Manual chuck with lever for Macro holder. Horizontal mounting on the machine table. - Built-in latch function - Clamping force 6000 N - Fixed index positions 4x90°.

$1,617.00

System 3R 3R-602.4.1 compatible Pneumatic chuck Macro

0 out of 5

System 3R 3R-602.4.1 Compatible Pneumatic chuck Macro

System 3R 3R-602.4.1 compatible Pneumatic chuck Macro. Pneumatic chuck for Macro holder. Vertical mounting on the machine table - Required air pressure 6±1 bar. - Air-blast cleaning of Z-references. - Clamping force 6000 N - Fixed index positions 4x90°.

$3,450.00

3R compatible Chucks, System 3R Compatible, Wire EDM Tooling

System 3R 3R-602.81 Pneumatic Chuck Compatible Low Profile

0 out of 5

System 3R 3R-602.81 Pneumatic chuck Compatible Low Profile. Pneumatic chuck for permanent mounting on the machine table. Required drawbar 3R-605.10. Required air pressure 6±1. Fixed index positions 4x90°

$4,550.00

3R Compatible Drawbars, System 3R Compatible, Wire EDM Accessories, Wire EDM Tooling

System 3R 3R-605.10 Compatible WEDM Macro Drawbar

0 out of 5

System 3R 3R-605.10 compatible Wire EDM Macro Drawbar. Quality System 3r Tooling RHS Brand 3R-605.10 Wire EDM Macro Drawbar is of stainless steel material and is used for screw locking with RHS version 3r-652.9 manual chuck adaptor and other RHS version Wedm chucks.

SPECIFICATION
NAME	3R-605.10 WEDM Macro Drawbar Compatible
MATERIAL	STAINLESS STEEL

$42.00

SYSTEM 3R 3R-605.1E Drawbar Macro Compatible

5.00 out of 5

System 3R Macro 3R-605.1E Drawbar Compatible

System 3R Compatible 3R-605.1E, 3R-605.1RS Macro Long Automatic Drawbar. Rapid Holding Systems 3R Drawbar compatible with System 3R Macro 3R-605.1E, 3R-605.1RS. Ø20x57.1 mm with flushing hole Ø7 mm works perfectly with all system 3r parts.

$47.00

3R Compatible Drawbars, System 3R Compatible, Wire EDM Accessories, Wire EDM Tooling

System 3R 3R-605.26 Drawbar Wire EDM Compatible(50pc)

0 out of 5

System 3R 3R-605.26 Drawbar Wire EDM Compatible. Rapid Holding Systems version 3R-605.26 Compatible Drawbar is manual and is supplied in pack of 50pcs. Drawbar Ø20x32 mm and is rust resistant. This wire EDM draw bar is also included in our 3R-242S-4 User kit.

$1,500.00

3R Compatible Drawbars, System 3R Compatible, Wire EDM Accessories, Wire EDM Tooling

System 3R OEM 3R-605.27RS Drawbar rust-resistant

System 3R 3R-605.27RS compatible Drawbar rust-resistant

0 out of 5

System 3R 3R-605.27RS compatible Drawbar rust-resistant

System 3R 3R-605.27RS compatible Drawbar rust-resistant - Rust-resistant. - Drawbar Ø20x27 mm. - Supplied singly.

$40.00

System 3R 3R-605.2E compatible Manual Drawbar Short

5.00 out of 5

System 3R Compatible 3R-605.2E, 3R-605.2RS Drawbar

System 3R Drawbar 3R-605.2E, 3R-605.2RS Macro Drawbar Compatible Premium Manual Short. Rapid Holding Systems 3R Drawbar compatible with System 3R Macro 3R-605.2RS, 3R-605.2E. - Ø20x36.9 mm with flushing holes Ø7 mm.

$34.00

System 3R 3R-605.2RS Compatible Drawbar Manual Drawbar Short

0 out of 5

System 3R 3R-605.2RS compatible manual short Drawbar

System 3R Drawbar 3R-605.2RS Macro Drawbar Compatible Premium Manual Short. Rapid Holding Systems 3R Drawbar compatible with System 3R Macro 3R-605.2RS, 3R-605.2E. - Ø20x36.9 mm with flushing holes Ø7 mm.

$38.00

System 3R OEM 3R-605.5RS Drawbar Rust-resistant

System 3R 3R-605.5RS Compatible Drawbar Rust-resistant

0 out of 5

System 3R 3R-605.5RS Compatible Drawbar Rust-resistant

System 3R 3R-605.5RS compatible Drawbar Rust-resistant - Drawbar Ø20x19 mm - Rust-resistant - Minimum order quantity 50 pcs

$37.00

3R compatible Chucks, 3R Compatible Gauging Devices, System 3R Compatible

System 3R 3R-606.1 Compatible Macro Master Parallel Gauging

0 out of 5

System 3R 3R-606.1 Compatible Macro Master Parallel Gauging

System 3R 3R-606.1 Compatible Parallel Gauging Pin is compatible with System 3R and it is equivalent to 3R-606.1-N. It is use for setting angular positions and for centering chucks.

$1,040.00

3R Compatible Centering Device, 3R Compatible Gauging Devices, System 3R Compatible

System 3R 3R-606.1 Control ruler Macro Compatible

0 out of 5

System 3R 3R-606.1 Control ruler Macro Compatible

System 3R 3R-606.1 Control ruler Macro compatible
Check Control ruler macro for setting angular position and for centering Macro chucks. Ground hole for centering as required. Measure length 100 mm.

$985.00

3R Compatible pallets, System 3R Compatible

System 3R 3R-608.31E compatible Pallet 70x70 mm 3Refix 10 pcs Macro

0 out of 5

System 3R 3R-608.31E compatible Pallet 70x70 mm 3Refix 10 pcs Macro

System 3R compatible 3R-608.31E Pallet 70x70 mm 3Refix 10 pcs Macro
Unhardened with 3Refix holes and four M6 threads.
Designed to be mounted on 3R-601.3 or 3R-601.52.
- Building-in height 14.2 mm
- 3Refix Ø10 mm.
- Supplied in sets of ten.

$575.00

System 3R 3R-610.21-S Manual chuck CNC MacroStandard

5.00 out of 5

System 3R 3R-610.21-S Manual chuck CNC MacroStandard

System 3R 3R-610.21-S CNC Manual chuck MacroTwo ground faces for vertical or horizontal mounting on the machine table.

Required drawbar 3R-605.2
Tightening torque 6 Nm
Fixed index positions 4x90°

$1,171.00

System 3R 3R-610.46-3 compatible Pneumatic chuck

5.00 out of 5

System 3R 3R-610.46-3 compatible Pneumatic chuck

System 3R 3R-610.46-3 compatible Pneumatic table chuck MacroHighPerformance. RHS version 3R-610.46-3 comes with integral air unit on the side. Pneumatic chuck locked/opened with air gun.

Required drawbar 3R-605.1 or 3R-605.4
All references of hardened and ground steel
Required air pressure 6±1 bar
Fixed index positions 4x90º
Air-blast cleaning of the Z-references
Turbo locking
Weight 4.4 kg

$3,795.00

3R compatible Chucks, Special Bundle Deals, System 3R Compatible

System 3R 3R-628.31-S compatible User kit Macro

0 out of 5

System 3R 3R-628.31-S compatible User kit Macro

System 3R 3R-628.31-S compatible User kit MacroIncludes:Contents: 3R-605.1, Compatible Drawbar, long, 4 pcs. 3R-605.2, Compatible Drawbar, short, 2 pcs. 3R-610.21-S, Compatible Manual table chuck, Macro. 3R-651.7-S, Compatible Pallet, 54x54 mm, Macro, 12 pcs. 3R-656.1, Compatible Check ruler, Macro. 3R-658.1-S, Compatible Spacer plate 54x54 mm, 2 pcs. 3R-658.4-S, Compatible Holder 54x54 mm, Macro, 4 pcs. 3R-658.2-S, Compatible Holder 54x54 mm, Macro, 4 pcs. Allen keys. Screws.

$2,645.00

System 3R Compatible

System 3R 3R-628.41-S Compatible User Kit Macro

0 out of 5

System 3R 3R-628.41-S Compatible User Kit Macro

Included: Description	Qty
3R-465.1-A compatible Holder with MacroJunior taper	4
3R-461.1-GA compatible Holder with MacroJunior journal	2
3R-466.4033 compatible Chuck adapter Macro/MacroJunior	1
3R-466.10033 compatible Chuck adapter Macro/Macrojunior	1
3R-491 Holder 25 mm MacroJunior (Set of 30 pcs)	1
3R-605.1 compatible Drawbar, long	4
3R-605.2 compatible Drawbar, short	2
3R-610.21-S compatible Manual table chuck	1
3R-651.7-S compatible Pallet, 54×54 mm	8
3R-656.1 compatible Check ruler	1
3R-658.1-S compatible Spacer plate 54×54 mm	2
3R-658.4-S compatible Holder 54×54 mm	2
3R-658.2-S compatible Holder 54×54 mm	2

$6,550.00

System 3R 3R-651.13 compatible Holder Macro

0 out of 5

System 3R 3R-651.13 compatible Holder Macro

System 3R 3R-651.13 compatible Holder Macro. Hardened holder for square elecrtodes max 30 mm. - Adapted for automatic changing. - Parallel-ground top and bottom faces. - Fixed index positions 4x90°. - Flushing connection.

$950.00

3R Compatible pallets, System 3R Compatible

System 3R 3R-651.3 Compatible 3Refix Macro Pallet 52x52 mm

0 out of 5

System 3R 3R-651.3 Compatible 3Refix Macro Pallet

System 3R 3R-651.3 Compatible 3Refix Macro Pallet 52x52 mm Hardened, with 3Refix holes, flushing connection and clearance holes for two fixing screws.
- Fixed index positions 4x90°.
- Flushing duct.
- 3Refix Ø10 mm.
- Parallel-ground top and bottom faces.
- Ready for code carrier.
- Adapted for automatic changing.
- Rust-resistant.

$475.00