248-250-8937
519-999-9723
+1 844 686-0671
ER-010596 Erowa OEM Uniblank EWIS, Set of 12
Version Set of 12 units, prepared for the installation of the code carrier. Order EWISTM chip, ER-035154 separately!
ER-007980 Erowa OEM Chucking Spigot F/A Inox (w/o flush) Set of 20
Version Automatic. M10x45mm bolt, stainless (without flushing hole). Application For all holders that are changed automatically. For WEDM and light chip cutting.
ER-069153 Erowa OEM ITS Chuck 100 P Inox Flat (16mm height)
Version Steel, hardened, with P-profil Clamping power 5000 N. Connections At the rear, with two lines. Operation With control unit Note To hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 and PM85 Precise.
ER-058250 Erowa OEM ITS Chuck 100P with Base Plate 100
Version Steel, hardened, with P-profile. Clamping power 6000 N. Connections Air valves, lateral. Operation With air gun. Application To hold pallet ø 115 / ø 148 and pallets PM56, PM60, PM85 Precise.
ER-055294 Erowa OEM ITS Chuck 50 INOX with base plate 80 x 120
Version System size 50, corrosion-resistant. Clamping power 2800 N. Attachment With 4xM8 bolts from the front. Application On milling and grinding machines and on EDM/WEDM centers. Note Chuck can be operated manually or automatically. Pneumatic connections on the side of the chuck.
ER-048519 Erowa OEM ITS Chuck 50 Inox
Version System size 50, corrosion-resistant. Clamping power 2800 N. To be fitted with 8 M5 bolts from the front. Application For fixtures produced by users themselves. Note Chuck can be operated manually or automatically. Air connections laterally or at the rear.
ER-047743 Erowa OEM ITS Chuck 100 P Inox 118 x 118
Version Steel, hardened, stainless Clamping power 5,000 N Connections Laterally or at the rear, with two lines. Operation With control unit or with compressed-air jet. Application To hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 and PM85 Precise.
ER-045076 Erowa OEM ITS Chuck 100 P 118 x 118
Version Steel, hardened. Clamping power 6000 N. Connections Laterally or at the rear, with two lines. Operation With control unit or compressed-air jet. Application For receiving pallets ø 115 / ø 148, electrode holders, pallets PM56, PM60 and PM85 Precise.
ER-043124 Erowa OEM ITS Chuck 100 P Inox 102 x 102
Version Steel, hardened, INOX. Clamping power 5000 N. Connections On the side or at the rear, with two lines. Operation With control unit or with air jet. Application To hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 and PM85 Precise.
ER-043123 Erowa OEM ITS Chuck 100 P Inox w/o Base Plate
Version Steel, hardened, INOX. Clamping power 5000 N. Connections At the rear, with two lines. Operation With control unit
ER-038826 Erowa OEM QuickChuck 100 P / R
Version On base plate ø 110mm with rotatable flushing connection. To fit With 4 M6 bolts. Application On EDM machines with quill rotation. Please note Clamping power of up to 10’000 N.
ER-038824 Erowa OEM QuickChuck 100 P with Base Plate
Version System size 100, manual, stainless, with base plate. To fit With bolts or clamps. Application On milling, grinding and EDM machines. Please note Clamping power of up to 10000 N.
ER-037970 Erowa OEM ITS Chuck 100 P w/o Base Plate
Version Steel, hardened. Clamping power 6000 N. Connections At the rear, with two lines. Operation With control unit. Application For receiving pallets ø 115 / ø 148, electrode holders, pallets PM56, PM60 and PM85 Precise.
ER-036345 Erowa OEM QuickChuck 100P
Version System size 100, manual, stainless. To fit With 4 M8 bolts. Application On lathes, milling, grinding, EDM/WEDM machines, fixtures and dividing heads. Please note Clamping power of up to 10’000 N. Max. speed: 3000 rpm.
ER-035519 Erowa OEM ITS chuck 100 P 102 x 102
Version Steel, hardened. Clamping power 6000 N. Connections On the side or at the rear, with two lines. Operation With control unit or with air jet. Application For receiving pallets ø 115 / ø 148, electrode holders, pallets PM56, PM60 and PM85 Precise.
ER-035288 Erowa OEM ITS Chuck 100 P with Support
Version Steel, hardened. Clamping power 6000 N. Connections At the rear Operation With control unit. Application On powder presses. To accommodate centering set pallet PM Basic and pallets PM56, PM60 and PM85 Precis
ER-034387 Erowa OEM QuickChuck 50
Version System size 50, manual, corrosion‑resistant. Attachment 4 x M8 from the rear or 4 x M6 stud bolts with nuts. Application On EDM/WEDM centers for light milling and grinding work. Max. revolutions on rotating axes 2000 rpm.
ER-019424 Erowa OEM Universal Square Block
Version Steel, hardened, corrosion-resistant. Application For attaching 1 or 2 chucks in horizontal and/or vertical position. Fits ITS chucks, QuickChuck 50, QuickChuck 100. Note Delivery without chucks.
ER-011803 Erowa OEM Chuck 50 RSA w/o Base Plate
Version Chuck 50 RSA, automatic with pneumatic valve. Clamping power 2800 N. Attachment With 4 M6 bolts from the rear.
ER-007625 Erowa OEM Rapid-Action Chuck Automatic NSF
Version Enlarged centering prisms. NSF = increased clamping power up to 7000 N. Connections On back. Application Milling and grinding machines, dividers.
ER-007623 Erowa OEM Rapid-chuck automatic on clamping plate
Version Enlarged centering prisms. NSF = increased clamping power up to 7000 N. Connections On side. Application Chip-removal machining of palletized workpieces.
ER-007621 Erowa OEM Rapid-Action Chuck Automatic NSF Inox
Version Stainless, NSF = increased clamping power up to 7000 N. Connections At the rear. Application With cooling/flushing water conducive to corrosion.
ER-007612 Erowa OEM Rapid-Action Chuck NSF on Angle Plate
Version Standard type on type G angle plate. NFS = increased clamping power up to 7000 N. Connections Pneumatic valves on the side, flushing through chucking spigot. Application To produce electrodes, and on EDM quill.
ER-007604 Erowa OEM Manual Rapid-Action Chuck NSF
Version NSF = increased clamping power up to 7000 N. Connections Pneumatic valves on side, flushing on back. Application Electrode fabrication general.