248-250-8937
519-999-9723
+1 844 686-0671
ER-133250 Erowa OEM Pallet ø 148 G Blank ALU
Version Aluminum pallet without mounting hole pattern. With centering plate G (ground). With optimized center of mass. Application To accommodate workpieces and fixtures for chipcutting production. Fitting a blank In any suitable manner.
ER-129071 Erowa OEM Uniholder (Set of 12)
Version Brass holder ITS 50 with 20.5mm slot. Including 25xM8 threaded pins. Application To mount electrodes and workpieces with shank sizes of up to 20mm. To fit blank With threaded pins. If necessary, center with spacer plates ER-010532. Please note Order EWISTM chip (ER-094168) and chucking spigots separately.
ER-115712 Erowa OEM Pallet ø 148 G R25 ALU
Version Aluminum pallet with hole pattern 25, ø10F7, M10 thread. With centering plate G (ground). With optimized center of mass. Application To accommodate workpieces and electrodes. Construction of fixtures and ClampSet Base 220. Fitting a blank Through the pallet with M8 bolts or through the blank with M10 bolts.
ER-115660 Erowa OEM Pallet ø 115 G
Version Steel, rust-resistant. With centering plate G (ground). Application To accommodate electrodes, workpieces and fixtures for chip-cutting production. Fitting a blank Through the pallet with M8 bolts or through the blank with M10 bolts.
ER-115657 Erowa OEM Pallet Ø 115 MS
Version Steel, rust-resistant. With centering plate 100 (punched). Application To accommodate electrodes, workpieces and fixtures for chip-cutting production. Fitting a blank Through the pallet with M8 bolts or through the blank with M10 bolts.
ER-115523 Erowa OEM Pallet Ø 148 P Blank
Version Steel, rust-resistant. Without mounting hole pattern. Centering integrated in the pallet. With optimized center of mass. Application To accommodate workpiece and fixtures for chip-cutting production. Fitting a blank In any suitable manner.
ER-115521 Erowa OEM Pallet Ø 148 P
Version Steel, rust-resistant. Centering integrated in the pallet. With optimized center of mass. Application To accommodate workpieces and fixtures for chip-cutting production. Fitting a blank Through the pallet with M8 bolts or through the blank with M10 bolts. Please note Compatible with EROWA ProductionChuck 210 Combi.
ER-115388 Erowa OEM Pallet ø 148 G R25
Version Steel pallet with hole pattern 25, ø10F7 and M10 thread. With centering plate G (ground). With optimized center of mass. Application To accommodate workpieces and electrodes. Construction of fixtures and ClampSet Base 220. Fitting a blank Through the pallet with M8 bolts or through the blank with M10 bolts.
ER-115379 Erowa OEM Pallet Ø 148 G Blank
Version Steel, rust-resistant. Without mounting hole pattern. With centering plate G (ground). With optimized center of mass. Application To accommodate electrodes, workpieces and fixtures for chip-cutting production. Fitting a blank In any suitable manner.
ER-090744 Erowa OEM Magnetic Clamping Plate Neospark / 250x150x46
Version Magnetic clamping plate made of steel, with two lateral stop bars. Clamping power of the magnet: 100N/cm2. Prepared with 4xM8 boreholes to be fitted to pallet ø148. Application Clamping workpieces magnetically for surface and profile grinding, EDM and high-frequency milling. Recommended minimum workpiece size: 4x4xmm.
ER-051969 Erowa OEM Chucking Spigot Clip 2 Closed, Set of 20
Version Synthetic, set of 20. Electroconductive. To be fitted to ITS chucking spigot F/A. Application To fit to ITS chucking spigot F/A. To load/unload ITS electrodes and electrode holders with EROWA Combi gripper.
ER-051968 Erowa OEM Chucking Spigot Clip 2 Open, Set of 20
Version Synthetic, set of 20. Electroconductive. To be fitted to ITS chucking spigot F/A. Application To fit on ITS chucking spigot F/A. To load/unload ITS electrodes and electrode holders with EROWA Combi gripper.
ER-051381 Erowa OEM Chucking Spigot F/M Production, Set of 20
Version Manual. M10x50mm bolt, 12.9 quality (without flushing hole). Application To mount on EROWA pallets for chip-cutting machining processes.
ER-050195 Erowa OEM Centering Plate 100 M8, Set of 1
Version Corrosion-resistant, including 4 supporting feet M8 and 4 x M5 screws per plate. Application Workpieces and electrodes. Mounting Mounted directly on of blank plane surface of blank.
ER-036658 Erowa OEM Centering Plate G Inox, Set of 5
Version Centering plate G (ground), rust-resistant, including 8 supporting feet SW13, of which 4 supporting feet with height 10.2mm and 4 with height 11.4mm. Application For workpieces, fixtures and gauges in chip-cutting production. Please note Can also be used to repair older pallet types ø 148 G, for instance ER-015777, ER-015899, ER-032699, etc. To fit a blank According to the fitting instructions supplied.
ER-036657 Erowa OEM Centering Plate G Inox, Set of 1
Version Centering plate G (ground), rust-resistant, including 8 supporting feet SW13, of which 4 supporting feet with height 10.2mm and 4 with height 11.4mm. Application For workpieces, fixtures and gauges in chip-cutting production. Please note Can also be used to repair older pallet types ø 148 G, for instance ER-015777, ER-015899, ER-032699, etc. To fit a blank According to the fitting instructions supplied.
ER-035297 Erowa OEM Collet Chuck Holder ø 72, 1 piece
Version One collet chuck holder with chucking spigot. System size ITS 50. Application To clamp cylindrical parts. Clamping range ø 2 mm - ø 20 mm. Please note Order collet chucks type ETS 32 separately.
ER-035212 Erowa OEM Uniplate ø 72, Set of 6
Version Set of 6 units, includes 12 PinLock locking pins. System size ITS 50, without chucking spigots. Application To mount electrodes and workpieces with surface more than square 40 x 40 mm or ø 50 mm. Mounting With two PinLock locking pins.
ER-035211 Erowa OEM Uniholder ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To mount electrodes and workpieces with shaft of up to 20 mm.
ER-035210 Erowa OEM Uniblank ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To mount electrodes and workpieces of various shapes. Mounting Attachment boreholes to be drilled according to requirements.
ER-035209 Erowa OEM Prisround ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To mount electrodes and workpieces with shafts of up to square 25 mm.
ER-035117 Erowa OEM Blank Holder ø 72 without Borehole, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To clamp cylindrical parts. Mounting Attachment borehole up to max. ø 12 mm to be drilled according to requirements.
ER-035114 Erowa OEM Blank holder ø 10 / ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To clamp cylindrical parts with ø 10 mm.
ER-035097 Erowa OEM Blank holder ø 20 / ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To clamp cylindrical parts with ø 20 mm.