248-250-8937
519-999-9723
+1 844 686-0671
ER-115523 Erowa OEM Pallet Ø 148 P Blank
Version Steel, rust-resistant. Without mounting hole pattern. Centering integrated in the pallet. With optimized center of mass. Application To accommodate workpiece and fixtures for chip-cutting production. Fitting a blank In any suitable manner.
ER-115521 Erowa OEM Pallet Ø 148 P
Version Steel, rust-resistant. Centering integrated in the pallet. With optimized center of mass. Application To accommodate workpieces and fixtures for chip-cutting production. Fitting a blank Through the pallet with M8 bolts or through the blank with M10 bolts. Please note Compatible with EROWA ProductionChuck 210 Combi.
ER-115388 Erowa OEM Pallet ø 148 G R25
Version Steel pallet with hole pattern 25, ø10F7 and M10 thread. With centering plate G (ground). With optimized center of mass. Application To accommodate workpieces and electrodes. Construction of fixtures and ClampSet Base 220. Fitting a blank Through the pallet with M8 bolts or through the blank with M10 bolts.
ER-115379 Erowa OEM Pallet Ø 148 G Blank
Version Steel, rust-resistant. Without mounting hole pattern. With centering plate G (ground). With optimized center of mass. Application To accommodate electrodes, workpieces and fixtures for chip-cutting production. Fitting a blank In any suitable manner.
ER-090744 Erowa OEM Magnetic Clamping Plate Neospark / 250x150x46
Version Magnetic clamping plate made of steel, with two lateral stop bars. Clamping power of the magnet: 100N/cm2. Prepared with 4xM8 boreholes to be fitted to pallet ø148. Application Clamping workpieces magnetically for surface and profile grinding, EDM and high-frequency milling. Recommended minimum workpiece size: 4x4xmm.
ER-051969 Erowa OEM Chucking Spigot Clip 2 Closed, Set of 20
Version Synthetic, set of 20. Electroconductive. To be fitted to ITS chucking spigot F/A. Application To fit to ITS chucking spigot F/A. To load/unload ITS electrodes and electrode holders with EROWA Combi gripper.
ER-051968 Erowa OEM Chucking Spigot Clip 2 Open, Set of 20
Version Synthetic, set of 20. Electroconductive. To be fitted to ITS chucking spigot F/A. Application To fit on ITS chucking spigot F/A. To load/unload ITS electrodes and electrode holders with EROWA Combi gripper.
ER-051381 Erowa OEM Chucking Spigot F/M Production, Set of 20
Version Manual. M10x50mm bolt, 12.9 quality (without flushing hole). Application To mount on EROWA pallets for chip-cutting machining processes.
ER-050195 Erowa OEM Centering Plate 100 M8, Set of 1
Version Corrosion-resistant, including 4 supporting feet M8 and 4 x M5 screws per plate. Application Workpieces and electrodes. Mounting Mounted directly on of blank plane surface of blank.
ER-036658 Erowa OEM Centering Plate G Inox, Set of 5
Version Centering plate G (ground), rust-resistant, including 8 supporting feet SW13, of which 4 supporting feet with height 10.2mm and 4 with height 11.4mm. Application For workpieces, fixtures and gauges in chip-cutting production. Please note Can also be used to repair older pallet types ø 148 G, for instance ER-015777, ER-015899, ER-032699, etc. To fit a blank According to the fitting instructions supplied.
ER-036657 Erowa OEM Centering Plate G Inox, Set of 1
Version Centering plate G (ground), rust-resistant, including 8 supporting feet SW13, of which 4 supporting feet with height 10.2mm and 4 with height 11.4mm. Application For workpieces, fixtures and gauges in chip-cutting production. Please note Can also be used to repair older pallet types ø 148 G, for instance ER-015777, ER-015899, ER-032699, etc. To fit a blank According to the fitting instructions supplied.
ER-035297 Erowa OEM Collet Chuck Holder ø 72, 1 piece
Version One collet chuck holder with chucking spigot. System size ITS 50. Application To clamp cylindrical parts. Clamping range ø 2 mm - ø 20 mm. Please note Order collet chucks type ETS 32 separately.
ER-035212 Erowa OEM Uniplate ø 72, Set of 6
Version Set of 6 units, includes 12 PinLock locking pins. System size ITS 50, without chucking spigots. Application To mount electrodes and workpieces with surface more than square 40 x 40 mm or ø 50 mm. Mounting With two PinLock locking pins.
ER-035211 Erowa OEM Uniholder ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To mount electrodes and workpieces with shaft of up to 20 mm.
ER-035210 Erowa OEM Uniblank ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To mount electrodes and workpieces of various shapes. Mounting Attachment boreholes to be drilled according to requirements.
ER-035209 Erowa OEM Prisround ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To mount electrodes and workpieces with shafts of up to square 25 mm.
ER-035117 Erowa OEM Blank Holder ø 72 without Borehole, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To clamp cylindrical parts. Mounting Attachment borehole up to max. ø 12 mm to be drilled according to requirements.
ER-035114 Erowa OEM Blank holder ø 10 / ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To clamp cylindrical parts with ø 10 mm.
ER-035097 Erowa OEM Blank holder ø 20 / ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To clamp cylindrical parts with ø 20 mm.
ER-032731 Erowa OEM Pallet Kit ø 148 MS, Set of 4
Version Standard type, punched centering plates.Application For electrodes and workpieces, and for the construction of fixtures.Mounting Through pallet with M8 bolts or through blank with M10 bolts.
ER-022250 Erowa OEM Adapter pallet ITS 50 / ø 148
Version ITS system size 100. Lock with central M10 locking bolt. Application To accommodate ITS Electrode holders system 50. Lock with central M10 locking bolt. For automatic handling.
ER-015465 Erowa OEM Chucking Spigot F/A EDM M10 x 45 for flushing, Set of 20
Version Automatic. M10x45mm bolt, with flushing hole. Application For ITS electrode holders that are changed automatically. For EDM and light chip cutting.
ER-013913 Erowa OEM System Stand, Set of 10
Version Plastic, set of 10. Application As a rack for four electrode holders 50 or a pallet ø 115/148 mm.
ER-011599 Erowa OEM Centering Plate 100 M8, Set of 10
Version Corrosion-resistant, including 4 supporting feet M8 and 4 x M5 screws per plate. Application Workpieces and electrodes. Mounting Mounted directly on plane surface of blank.