248-250-8937
519-999-9723
+1 844 686-0671
ER-009235 Erowa OEM Adapter ø 20mm
Version Hydraulic holding of ø 20 mm shafts. Application Recommended to hold the 20 mm EROWA thread holder.
ER-009007 Erowa OEM Viton Seal, Set of 10
Version Set of 10 seals. Application To fit ITS rapid-action and power.
ER-008547 Erowa OEM Support Foot SW13 / L=16, Set of 20
Application Supporting foot SW13, including M8 threaded pin, rust-resistant. Application Replacement of damaged supporting feet on EROWA pallets ø 148 G and on workpieces, fixtures and gauges of your own manufacture. ER-008553: to fit centering plate G. ER-02247: to fit outside centering plate G on older pallet types (for instance ER-015777). ER-008547: to fit centering plate 100 M8 punched, or to fit outside centering plate G on newer pallet types (for instance ER-115308).
ER-007618 Erowa OEM Cover for rapid-action chuck
Version Aluminum, without supports and centering plate. Application To protect rapid-action chucks against dirt.
ER-103681 Erowa OEM EDM ITS Standard Set C
Version 50 electrodeholders type C and a comprehensive assortment of accessories for electrode manufacturing. Application Starter kit for CNC controlled EDM machines with ITS spindlechuck integrated.
ER-103680 Erowa OEM QuickChuck 100 EDM Set C
Version Starter kit for manual or CNC controlled EDM machines with ITS spindle chuck mounted. Application The QuickChuck 100 is best used for electrode manufacturing.
ER-103679 Erowa OEM My First EROWA QuickChuck 100 P C
Application Starting set for newcomers, with ITS chuck on the EDM quill. Version 3 x Uniplate C 3 x Prisround C 3 x Uniblank C 6 x Setscrew M8 x 16 for Prisround 6 x Setscrew M8 x 16 for Uniholder 1 x Blank holder ø 20 mm 1 x Blank holder ø 12 mm 1 Blank holder ø 10 mm 6 x Hex bolt with slot M6 x 20 for Uniplate 1 x Checking pin 3 x Uniholder C 1 x Toolkit ITS 1 x QuickChuck 100 P with base plate 5 x Chucking spigot F/A EDM
ER-138950 Erowa OEM Alignment Pallet ø 148 P
Version Pallet P ø 148 with ground alignment rail and four Z-measuring surfaces, including chucking spigot F/M Production. Application Alignment of the angle position and determination of the Z-values of ITS Chucks 100 P, PowerChucks P and PC 210 Combi chucks.
ER-115699 Erowa OEM Alignment Pallet ø 115 MS
Version Pallet ø 115 mm, alignment length 110 mm, center borehole ø 12 mm. Application Alignment of radial, axial and angular position of ITS chucks, PowerChuck P and PC 210 Combi chucks.
ER-106423 Erowa OEM Probe with Ball ø 2 mm on Extension 20 mm for Gripper C
Version Holder with spring-loaded sensing pin and tungsten carbide ball. Overrun protection: X, Y, 1 mm. Overrun protection: Z 0.5 mm. Repetition accuracy: X, Z, Y 0.002 mm. Application Automatic measurement of workpieces in CNC EDM sinking centers.
ER-106341 Erowa OEM Probe with Ball ø 5 mm on Extension 20 mm for Gripper C
Version Holder with spring-loaded sensing pin and tungsten carbide ball. Overrun protection: X, Y, 1 mm. Overrun protection: Z 0.5 mm. Repetition accuracy: X, Z, Y 0.002 mm. Application Automatic measurement of workpieces in CNC EDM sinking centers.
ER-032464 Erowa OEM Microscope with Pointed Checking Pin
Version Amplification factor: 40x Illumination: 5 V, Tansformer: 100-240 V. Application Determination of dimensions for complicated contours. The checking pin with tip serves for adjustment of the optical system.
ER-010723 Erowa OEM Checking Pin 50
Version Hardened, ground. Application Alignment of radial, axial and angular position of ITS chucks.
ER-010562 Erowa OEM Sensor with ball ø 2mm
Version Holder with spring-loaded sensing pin and tungsten carbide ball. Overrun protection: X, Y, Z 1 mm. Repetition accuracy: X, Z, Y 0.002 mm. Application Automatic measurement of workpieces in CNC EDM sinking centers.
ER-010561 Erowa OEM Replacement Sensor Pin ø 2mm
Version Tungsten carbide, incl. adapter part, without spacer washer Application Replacement of pins in sensors ER-008638 and ER-010562 Attention: spacer washer is matched to the respective sensor.
ER-010560 Erowa OEM Replacement Sensor Pin ø 5mm
Version Tungsten carbide, incl. adapter part, without spacer washer Application Replacement of pins in sensors ER-008638 and ER-010562 Attention: spacer washer is matched to the respective sensor.
ER-008649 Erowa OEM Rotatable Centering Device Complete
Version Holder with rotating and sliding part, including metric dial gauge mm. Scale graduation: 0.01 mm. Application Concentricity measurement of workpieces on machines without rotating axis.
ER-008638 Erowa OEM Sensor with ball ø 5mm
Version Holder with spring-loaded sensing pin and tungsten carbide ball. Overrun protection: X, Y, Z 1 mm. Repetition accuracy: X, Z, Y 0.002 mm. Application Automatic measurement of workpieces in CNC EDM sinking centers.
ER-008633 Erowa OEM Fixed centering device
Version Holder with sliding part and metric dial gauge mm. Scale graduation: 0.01 mm. Application Concentricity measurement of workpieces on machines with C-axis or rotating spindle.
ER-008617 Erowa OEM Gauging Pin
Version Hardened, ground. Application Alignment of ITS chucks in radial, axial and angular position.
ER-095125 Erowa OEM Sealing Plate 50 C, Set of 5
Version Sealing plate, stainless. Application For retrofitting existing ITS 50 holders
ER-095124 Erowa OEM Sealing Plate 50 C, Set of 50
Version Sealing plate, stainless. Application For retrofitting existing ITS 50 holders
ER-094955 Erowa OEM Sealing Ring ITS 50 C for Chuck 50
Version Plastic. Application Prevents penetration of chips and dirt into the ITS Chuck 50 with application of EROWA HoldersITS50 C.