248-250-8937
519-999-9723
+1 844 686-0671
ER-007625 Erowa OEM Rapid-Action Chuck Automatic NSF
Version Enlarged centering prisms. NSF = increased clamping power up to 7000 N. Connections On back. Application Milling and grinding machines, dividers.
ER-007870 Erowa OEM Square 15 Holder - Front Part
Version Only clamping part of the holder. Application For the construction on multiple fixtures.
ER-007980 Erowa OEM Chucking Spigot F/A Inox (w/o flush) Set of 20
Version Automatic. M10x45mm bolt, stainless (without flushing hole). Application For all holders that are changed automatically. For WEDM and light chip cutting.
ER-008458 Erowa OEM V-Block Holder Stainless
Version Prism ground bearing surfaces 10 mm +/– 0.005 mm from the center. Application Clamping from outside, precision machined electrodes or small workpieces.
ER-008547 Erowa OEM Support Foot SW13 / L=16, Set of 20
Application Supporting foot SW13, including M8 threaded pin, rust-resistant. Application Replacement of damaged supporting feet on EROWA pallets ø 148 G and on workpieces, fixtures and gauges of your own manufacture. ER-008553: to fit centering plate G. ER-02247: to fit outside centering plate G on older pallet types (for instance ER-015777). ER-008547: to fit centering plate 100 M8 punched, or to fit outside centering plate G on newer pallet types (for instance ER-115308).
ER-008551 Erowa OEM Horizontal Holder ITS 50
Version Hardened and ground 90° angle and centering accuracy 0.005 mm. Application Clamping of electrode holders in horizontal position, may not be used for chip-machining.
ER-008595 Erowa OEM Zekant
Version Electrode holder with cross slide (2 mm travel) and pendulum movement (+/– 4°). Application Clamping and alignment of electrodes. Not suitable for chip-machining.
ER-008617 Erowa OEM Gauging Pin
Version Hardened, ground. Application Alignment of ITS chucks in radial, axial and angular position.
ER-008633 Erowa OEM Fixed centering device
Version Holder with sliding part and metric dial gauge mm. Scale graduation: 0.01 mm. Application Concentricity measurement of workpieces on machines with C-axis or rotating spindle.
ER-008638 Erowa OEM Sensor with ball ø 5mm
Version Holder with spring-loaded sensing pin and tungsten carbide ball. Overrun protection: X, Y, Z 1 mm. Repetition accuracy: X, Z, Y 0.002 mm. Application Automatic measurement of workpieces in CNC EDM sinking centers.
ER-008649 Erowa OEM Rotatable Centering Device Complete
Version Holder with rotating and sliding part, including metric dial gauge mm. Scale graduation: 0.01 mm. Application Concentricity measurement of workpieces on machines without rotating axis.
ER-008745 Erowa OEM Set of Collet Chucks ø 2.5 - 20mm
Version 19 collet chucks from ø 2.5 mm to ø 20 mm. Application For round material up to ø 20 mm.
ER-009007 Erowa OEM Viton Seal, Set of 10
Version Set of 10 seals. Application To fit ITS rapid-action and power.
ER-009235 Erowa OEM Adapter ø 20mm
Version Hydraulic holding of ø 20 mm shafts. Application Recommended to hold the 20 mm EROWA thread holder.
ER-009866 Erowa OEM Square 15 Electrode Shaft
Version Set of 40 shafts, drawn steel. Application To solder or bond to copper or graphite electrode blanks.
ER-010491 Erowa OEM Square 25 Electrode Shaft, Set of 24
Version Set of 24 shafts, soft steel, drawn profile. Application To solder or bond to blanks of up to 40 mm square.
ER-010495 Erowa OEM Square 15 Alignment Rail
Version Steel, hardened, ground. Application Testing of concentricity and angular accuracy of holder to ITS system.
ER-010497 Erowa OEM Square 15 Electrode Shaft M5, Set of 10
Version Set of 10 blanks, hardened, ground, including M5 bolts. Application To screw on to electrode blanks.
ER-010502 Erowa OEM Square 15 Chip Guard
Version Set of 10 guards, oil-resistant rubber. Application Protection against chips during electrode manufacturing.
ER-010505 Erowa OEM Square 25 Chip Guard
Version Set of 10 guards, oil-resistant rubber. Application Protection against chips during electrode manufacturing.
ER-010507 Erowa OEM Square 15 Electrode Stand, Set of 10
Version Set of 10 stands, styrene. Application Storage and transport of blanks and electrodes.
