248-250-8937
519-999-9723
+1 844 686-0671
System 3R OEM 3R-494-D40X50 3Ready-to-Run, 10 pcs. Ø40x50 mm
3Ready-to-Run, 3R-494-32X22X50 Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The Vällingby factory can supply holders with factory-mounted copper blanks in sets of ten, as shown in the table. 3R-494-D40x50* Round blank Ø40x50 mm
System 3R OEM 3R-494-D32X50 3Ready-to-Run, 10 pcs. Ø32x50 mm
3Ready-to-Run, 3R-494-32X22X50 Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The Vällingby factory can supply holders with factory-mounted copper blanks in sets of ten, as shown in the table. 3R-494-D32x50* Round blank Ø32x50 mm
System 3R OEM 3R-494-D26X50 3Ready-to-Run, 10 pcs. Ø26x50 mm
3Ready-to-Run, 3R-494-32X22X50 Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The Vällingby factory can supply holders with factory-mounted copper blanks in sets of ten, as shown in the table. 3R-494-D26x50* Round blank Ø26x50 mm
System 3R OEM 3R-494-D22X50 3Ready-to-Run, 10 pcs. Ø22x50 mm
3Ready-to-Run, 3R-494-32X22X50 Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The Vällingby factory can supply holders with factory-mounted copper blanks in sets of ten, as shown in the table. 3R-494-D22x50* Round blank Ø22x50 mm
System 3R OEM 3R-494-D16X50 3Ready-to-Run, 10 pcs. Ø16x50 mm
3Ready-to-Run, 3R-494-32X22X50 Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The Vällingby factory can supply holders with factory-mounted copper blanks in sets of ten, as shown in the table. 3R-494-D16x50* Round blank Ø16x50 mm
System 3R OEM 3R-494-D12X50 3Ready-to-Run, 10 pcs. Ø12x50mm
3Ready-to-Run, 3R-494-32X22X50 Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The Vällingby factory can supply holders with factory-mounted copper blanks in sets of ten, as shown in the table. 3R-494-D12x50* Round blank Ø12x50 mm
System 3R OEM 3R-494-D10X50 3Ready-to-Run, 10 pcs. Ø10x50mm
3Ready-to-Run, 3R-494-32X22X50 Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The Vällingby factory can supply holders with factory-mounted copper blanks in sets of ten, as shown in the table. 3R-494-D10x50* Round blank Ø10x50 mm
System 3R OEM 3R-494-40X22X50 3Ready-to-Run, 10 pcs. 40x22x50 mm
3Ready-to-Run, 3R-494-32X22X50 Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The Vällingby factory can supply holders with factory-mounted copper blanks in sets of ten, as shown in the table. 3R-494-40x22x50 Square blank 40x22x50 mm
System 3R OEM 3R-494-32X22X50 3Ready-to-Run, 10 pcs. 32x22x50 mm
3Ready-to-Run, 3R-494-32X22X50 Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The Vällingby factory can supply holders with factory-mounted copper blanks in sets of ten, as shown in the table. 3R-494-32x22x50 Square blank 32x22x50 mm
System 3R OEM 3R-494.400-M16 Set of 400 THREAD ON M16x1.5 3R-READY-2-RUN COIN
System 3R OEM 3R-494.400-M16 Set of 400 THREAD ON M16x1.5 3R-READY-2-RUN COIN
System 3R OEM 3R-494.400 Set of 400 ALUMINIUM HOLDER PRESS-IN TYPE HEX.30 R2R
System 3R OEM 3R-494.400 Set of 400 ALUMINIUM HOLDER PRESS-IN TYPE HEX.30 R2R
System 3R OEM 3R-494.001-M16 Single Aluminum THREAD ON 3R-READY-2-RUN COIN
System 3R OEM 3R-494.001-M16 Single Aluminum THREAD ON 3R-READY-2-RUN COIN
System 3R OEM 3R-494.001 Single ALUMINIUM HOLDER PRESS-IN TYPE HEX.30 R2R
System 3R OEM 3R-494.001 Single ALUMINIUM HOLDER PRESS-IN TYPE HEX.30 R2R
System 3R OEM 3R-936-60.38 Reference table 600x380x32 mm, 3Refix
3Refix Reference tables Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. NOTE: Customised reference tables can be made to order. NOTE: Hardened reference tables (650-700 HB) can be made to order. Use the order form at the end of the catalogue. 3R-936-60.38 A = 600 mm B = 380 mm C = 32 mm Weight 55 kg
System 3R OEM 3R-901-20RS 3Refix mandrel, Ø20 mm, rust-resistant
3Refix mandrel NOTE: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.3R-901-20RS 3Refix Ø20 mm Rust-resistant Recommended tightening torque 10 Nm Supplied singly Weight 0.1 kg
System 3R OEM 3R-901-20PM-TX 3Refix mandrel, Ø20 mm, Torx
System 3R OEM 3R-901-20PM-TX 3Refix mandrel, Ø20 mm, Torx
System 3R OEM 3R-901-20/70RS 3Refix mandrel, Ø20/70 mm, RS
System 3R OEM 3R-901-20/70RS 3Refix mandrel, Ø20/70 mm, RS
System 3R OEM 3R-901-10-TX 3Refix mandrel Ø10 EDM, TORX
System 3R OEM 3R-901-10-TX 3Refix mandrel Ø10 EDM, TORX
System 3R OEM 3R-901-10RS-TX 3Refix mandrel Ø10 WEDM, TORX
System 3R OEM 3R-901-10RS-TX 3Refix mandrel Ø10 WEDM, TORX
System 3R OEM 3R-901-10PM-TX 3Refix mandrel Ø10 PM , TORX
System 3R OEM 3R-901-10PM-TX 3Refix mandrel Ø10 PM , TORX
System 3R OEM 3R-901-10E-TX 3Refix mandrel Ø10 EDM 10 pcs, TORX
3Refix mandrel NOTE: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3R-901-10E-TX 3Refix Ø10 mm Recommended tightening torque 4 Nm Supplied in sets of 10 pcs Weight per set 0.2 kg