Shop

Erowa ER-007986 Square 15 electrode holder compatible for ITS 50

0 out of 5

Erowa ER-007986 Square 15 electrode holder 15mm

Erowa ER-007986 Square 15 electrode holder compatible for ITS 50. It can carry electrode whose blank of the surface is square 15mm. It applies to EDM/WEDM (Wire/electrical discharge machining)

$510.00

Erowa ER-007986 Square 15 electrode holder compatible for ITS 50-12pcs

0 out of 5

Erowa ER-007986 Square 15 electrode holder.

Erowa ER-007986 Square 15 electrode holder compatible for ITS 50. It can carry electrode whoes blank of surface is square 15mm. It applies to EDM/WEDM (Wire/electrical discharge machining). Also, sold as single piece.

$4,800.00

Erowa ER-007986 Square 25 electrode holder compatible for ITS 50

0 out of 5

Erowa ER-007986 Square 25 electrode holder.

Erowa ER-007986 Square 25 electrode holder compatible for ITS 50. It can carry electrode blank of surface is square 25mm. It applies to EDM/WEDM (Wire/electrical discharge machining)

$510.00

Erowa ER-007986 Square 25 electrode holder compatible for ITS 50-12pcs

0 out of 5

Erowa ER-007986 Square 25 electrode holder-12pcs

Erowa ER-007986 Square 25 electrode holder compatible for ITS 50. It can carry electrode blank of surface is square 25mm. It applies to EDM/WEDM (Wire/electrical discharge machining). Also sold as single piece.

$5,100.00

Erowa ER-007986 Square 25mm electrode holder compatible for ITS 50

0 out of 5

Erowa ER-007986 Square 25 electrode holder.

Erowa ER-007986 Square 25 electrode holder compatible with ITS 50. It can carry electrode whose blank of the surface is square 25mm. It applies to EDM/WEDM (Wire/electrical discharge machining)

$510.00

Erowa ER-008186 Compatible chuck 50 RSA with base plate

0 out of 5

Erowa ER-008186 Compatible chuck 50 RSA

Erowa ER-008186 Compatible chuck 50 RSA with base plate.Version: Chuck 50 RSA, automatic, with pneumatic connection.CIamping power: 2800 N.AppIication : ITS basis for the manuaI Ioading of ITS eIements or for automatic operation.

$1,595.00

Erowa ER-008186 Compatible chuck 50 RSA without base plate

0 out of 5

Erowa ER-008186 Compatible chuck 50 RSA

Erowa ER-008186 Compatible chuck 50 RSA without base plate.version: Chuck 50 RSA, automatic with pneumatic vaIve.CIamping power: 2800 N.Attachment: With 4 M6 boIts from the rear.AppIication: ITS basis for the manuaI Ioading of ITS eIements or for automatic operation

$1,525.00

Erowa ER-008458 compatible Stainless Steel V-block Holder

Erowa ER-008458 compatible Stainless Steel V-block Holder

0 out of 5

ER-008458 compatible Stainless Steel V-block Holder

Erowa ER-008458 V-block Holder Stainless. Suitable for clamping precision prism ground bearing, machined electrodes or small workpieces from outside.

$595.00

Erowa ER-008566 Compatible 360 degree rotatable Pneumatic Chuck 80

0 out of 5

Erowa ER-008566 Compatible 360 degree rotatable Pneumatic Chuck 80. Rapid Holding Systems Erowa ER-008566 is pneumatic chuck and 360 degree rotatable.

SPECIFICATION
SIZE	240X130X90mm
MATERIAL	STAINLESS STEEL 420 48-52HRC

$2,460.00

Erowa ER-008566 Compatible Automatic Rotate Pneumatic Chuck D100

5.00 out of 5

EROWA ER-008566 Compatible Automatic Rotate Pneumatic Chuck D100

AUTOMATIC 90 DEGREE ROTATING
OPERATING BY AIR PRESSURE , MECHANICAL ACTION
COMBINE WITH CHUCK
AVAILABLE TO USE IN 4 AXIS MACHINING

$4,500.00

Er collet, Erowa Compatible Holders, EROWA ITS Compatible

EROWA ER-008566 Compatible Collet chuck holder 50 ER16

0 out of 5

EROWA COMPATIBLE ER-008566 ER16 Collet chuck holder 50

Macro Performance ER16 Collet Chuck for round material, Holder come complete ready to run.

$595.00

Er collet, Erowa Compatible Holders, EROWA ITS Compatible

EROWA ER-008566 Compatible Collet chuck holder 50 ER32

0 out of 5

EROWA ER-008566 Compatible ER32 Collet chuck holder 50

ER-008566 Compatible Macro Performance ER32 Collet Chuck for round material, Holder come complete ready to run.

$595.00

Special Bundle Deals

Erowa ER-008566 Compatible Collet Chuck Holder 50 ER32 — Special Bundle Deal

0 out of 5

Er collet, Erowa Compatible Holders, EROWA ITS Compatible

EROWA ER-008566 Compatible Collet chuck holder 50 ER40

0 out of 5

ER-008566 Compatible Macro Performance ER40 Collet Chuck for round material, Holder come complete ready to run.

AVAILABILITY: ER16, ER32, ER40

$615.00

Er collet, Erowa Compatible Holders, EROWA ITS Compatible

Erowa ER-008566 compatible ER16, ER32, ER40 Collet Chuck Holder 50

0 out of 5

Erowa ER-008566 compatible ER16, ER32, ER40 Collet chuck holder 50

Macro Performance ER16 Collet Chuck for round material, Holder come complete ready to run.Availabilty of SIZES: ER16, ER32, ER40

Erowa Compatible Gauging devices, EROWA ITS Compatible

EROWA COMPATIBLE ER-008617 Parallel Gauging Pin

Erowa ER-008617 compatible Parallel Gauging Pin RHS-E4531

0 out of 5

EROWA Compatible Parallel Gauging Pin

RHS Parallel gauging pin is compatible with EROWA ITS System. Comes Pre-mounted on Centering Plate 50 ER-009214. It's suitable to check the flatness and linear tolerance by two sides and the top. Beneficial to help you to installed and adjust the chuck position on CNC milling, CMM and EDM sink Machine center.

$920.00

Erowa Compatible Probes, EROWA ITS Compatible

Erowa ER-008638 ER-010562 compatible Spring Loaded Centering Sensor 3mm Tip

0 out of 5

Erowa ER-008638 ER-010562 compatible D3 Spring Loaded Centering Sensor 3mm Tip

EROWA ER-008638 ER-010562 D3 SPRING CENTERING SENSOR 3MM for the Automatic measurement of workpieces in CNC EDM sinking centers. Spring Loaded Centering Sensor is compatible with EROWA ITS System. It is equivalent to ER-008638 & ER-010562. Holder with spring sensing pin and tungsten carbide ball. It applies to automatically measure specification of workpieces in CNC EDM sinking centers. Repetition accuracy: X,Y,Z 0.002mm

$1,195.00

Erowa Compatible Gauging devices, Erowa Compatible Probes, EROWA ITS Compatible

Erowa ER-008649 compatible Rotatable centering device complete

0 out of 5

Erowa ER-008649 compatible Rotatable centering device

Erowa ER-008649 compatible Rotatable centering device. RHS version ER-008649 rotatable centering device is a holder with rotating and sliding part, including metric dial gauge mm. Scale graduation: 0.01 mm. Rotating centering device is a precision probe for concentricity measurement of workpieces on machines without a rotating axis.

Ask for Quote

Erowa Compatible Chucks, Erowa Compatible Holders

Erowa ER-008814 Compatible Precision vise 0 - 100 UnoSet

5.00 out of 5

Erowa ER-008814 Compatible Precision vise 0 - 100 UnoSet

Erowa ER-008814 Compatible Precision vise 0 - 100 UnoSet. The clamping range of it is from 0 to 100mm. Maximum extension 40mm at 100mm workpiece height. Workpiece fixed version. Size: 51X51X51mm. contain 1 pair of jaws of clamping size is 0-50mm.Note: Jaws of clamping size is 50- 75mm and 75- 100mm available on a separate order

$1,475.00

Erowa Compatible Adapters, EROWA ITS Compatible, RHS Adaptors, WEDM Chucks/Mounting Heads, Wire EDM Tooling

Erowa Rotatable pendulum vise 0 - 100 UnoSet ER-008856 Compatible

Erowa ER-008856 Compatible Rotatable pendulum vise

0 out of 5

Erowa ER-008856 Compatible 3 Axes High Precision Control Jig.

EROWA ER-008856 Rotatable pendulum vise. RHS version ER-008856 Rotatable pendulum vise 0 - 100 UnoSet clamps 0–100 mm and useful for adjustable workpiece positioning in three axes. Continuously able to rotate around 360°. Set with three pairs of clamping jaws

$1,495.00

Erowa ER-008972 Compatible Cover for PowerChuck P

Erowa Compatible Pallets

Erowa ER-008972 Compatible Cover for PowerChuck P

0 out of 5

Erowa ER-008972 Compatible Cover for PowerChuck P Style: Made of aluminum, Centering plate, No support legs Application: Prevents machining tips and liquid from entering when the power chuck P is not used.

$450.00

EROWA Compatible ER-010644 Uniplate Electrode Holder

EROWA ER-009219 Compatibl 51x51 Uniplate Electrode Flat Alum Holder

0 out of 5

EROWA ER-009219 Uniplate Flat Alum Electrode Holder

All holders come pre-mounted on EROWA plate "Ready to Run"

ALSO COMPATIBLE WITH ER-093780

$28.00

EROWA ER-009219 Compatible 51x51 Uniplate Electrode Brass Holder

0 out of 5

EROWA ER-009219 Uniplate Flat Brass Electrode Holder

All holders come pre-mounted on EROWA plate "Ready to Run"

ALSO COMPATIBLE WITH ER-093780

$35.00