248-250-8937
519-999-9723
+1 844 686-0671
ER-043124 Erowa OEM ITS Chuck 100 P Inox 102 x 102
Version Steel, hardened, INOX. Clamping power 5000 N. Connections On the side or at the rear, with two lines. Operation With control unit or with air jet. Application To hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 and PM85 Precise.
ER-045076 Erowa OEM ITS Chuck 100 P 118 x 118
Version Steel, hardened. Clamping power 6000 N. Connections Laterally or at the rear, with two lines. Operation With control unit or compressed-air jet. Application For receiving pallets ø 115 / ø 148, electrode holders, pallets PM56, PM60 and PM85 Precise.
ER-046044 Erowa OEM Chip Guard ø 148
Version Aluminum, for pallets ø 148 mm. Application Seals QuickChuck 100 P / ITS Chuck 100 P in use with pallets ø 148 mm against liquid and chips. Can be combined with ER-029313.
ER-046046 Erowa OEM Chip Guard ø 115
Version Aluminum, for pallets ø 115 mm. Application Seals QuickChuck 100 P / ITS Chuck 100 P in use with pallets ø 115 mm against liquid and chips. Can be combined with ER-029313.
ER-046221 Erowa OEM Reference Bolt (10 pieces)
Version Set of 10 bolts. Bolts have been reworked. Application On pallets ø 148 mm: for positional orientation in PowerChuck P and Robot magazines.
ER-047743 Erowa OEM ITS Chuck 100 P Inox 118 x 118
Version Steel, hardened, stainless Clamping power 5,000 N Connections Laterally or at the rear, with two lines. Operation With control unit or with compressed-air jet. Application To hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 and PM85 Precise.
ER-048478 Erowa OEM MTS Chip Guard Low
Version Aluminum, anodized Application The MTS chip guard serves to seal the automatic MTS chucks and base plates when MTS pallets are used. Note The MTS chip guard low cannot be combined with the MTS pallet P ø 148 Inox (ER-041928).
ER-048519 Erowa OEM ITS Chuck 50 Inox
Version System size 50, corrosion-resistant. Clamping power 2800 N. To be fitted with 8 M5 bolts from the front. Application For fixtures produced by users themselves. Note Chuck can be operated manually or automatically. Air connections laterally or at the rear.
ER-050195 Erowa OEM Centering Plate 100 M8, Set of 1
Version Corrosion-resistant, including 4 supporting feet M8 and 4 x M5 screws per plate. Application Workpieces and electrodes. Mounting Mounted directly on of blank plane surface of blank.
ER-051381 Erowa OEM Chucking Spigot F/M Production, Set of 20
Version Manual. M10x50mm bolt, 12.9 quality (without flushing hole). Application To mount on EROWA pallets for chip-cutting machining processes.
ER-051968 Erowa OEM Chucking Spigot Clip 2 Open, Set of 20
Version Synthetic, set of 20. Electroconductive. To be fitted to ITS chucking spigot F/A. Application To fit on ITS chucking spigot F/A. To load/unload ITS electrodes and electrode holders with EROWA Combi gripper.
ER-051969 Erowa OEM Chucking Spigot Clip 2 Closed, Set of 20
Version Synthetic, set of 20. Electroconductive. To be fitted to ITS chucking spigot F/A. Application To fit to ITS chucking spigot F/A. To load/unload ITS electrodes and electrode holders with EROWA Combi gripper.
ER-055294 Erowa OEM ITS Chuck 50 INOX with base plate 80 x 120
Version System size 50, corrosion-resistant. Clamping power 2800 N. Attachment With 4xM8 bolts from the front. Application On milling and grinding machines and on EDM/WEDM centers. Note Chuck can be operated manually or automatically. Pneumatic connections on the side of the chuck.
ER-055751 Erowa OEM Sealing Ring for Pallet ø115
Version Rust-resistant steel. Application Prevents penetration of chips and dirt into the PowerChuck P by application of EROWA ITS pallets ø 115.
ER-055761 Erowa OEM Sealing Ring for Holder 72, PowerChuck P
Version Rust-resistant steel Application Prevents penetration of chips and dirt into the PowerChuck P by application of EROWA Holders 72.
ER-058250 Erowa OEM ITS Chuck 100P with Base Plate 100
Version Steel, hardened, with P-profile. Clamping power 6000 N. Connections Air valves, lateral. Operation With air gun. Application To hold pallet ø 115 / ø 148 and pallets PM56, PM60, PM85 Precise.
ER-068585 Erowa OEM 3 Jaw Concentric Chuck Manual ø 125 on 148G Pallet
Version Manual 3-jaw concentric chuck ø 125 mm. Central clamping range 3-53mm. Body made of cast metal. High degree of concentricity according to DIN 6386. Fitted to pallet ø 148 G. Includes 3 hardened drilling jaws (stepped on the outside), 3 hardened turning jaws (stepped on the inside) 1 spanner. Note Max. speed 4000 min-¹. Application In combination with EROWA chucks on lathes, indexing tables, dividing heads, etc. Spare parts Block jaws, soft, for 3-jaw chuck, set of 3, size 125mm.
ER-068586 Erowa OEM 4 Jaw Concentric Chuck Manual ø 125 on 148G Pallet
Version Manual 4-jaw concentric chuck ø 125 mm. Central clamping range 3-53mm. Body made of cast metal. High degree of concentricity according to DIN 6386. Fitted to pallet ø 148 G. Includes 4 hardened drilling jaws (stepped on the outside), 4 hardened turning jaws (stepped on the inside), 1 spanner. Note Max. speed 4000 min-¹. Application In combination with EROWA chucks on lathes, indexing tables, dividing heads, etc. Spare parts Block jaws, soft, for 4-jaw chuck, set of 4, size 125mm.
ER-068697 Erowa OEM 3 Jaw Concentric Chuck Manual ø 140 on 148G Pallet
Version Manually operated three-jaw chuck ø140mm. Central clamping range 3-53mm. Body made of steel. High concentric accuracy according to DIN 6386. Fitted to pallet ø 148 G. Including 3 hardened drilling jaws (outward stepped), 3 hardened turning jaws (inward stepped) and 1 wrench. Please note Max. speed 5,000 min-¹. Application In combination with EROWA chucks on lathes, round tables, dividing heads, etc. Spare parts Block jaws, soft, for three-jaw chuck, set of 3, size 140mm.
ER-069153 Erowa OEM ITS Chuck 100 P Inox Flat (16mm height)
Version Steel, hardened, with P-profil Clamping power 5000 N. Connections At the rear, with two lines. Operation With control unit Note To hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 and PM85 Precise.
ER-078474 Erowa OEM 3 Jaw Concentric Chuck Manual ø 140mm on 148G Pallet
Version Manual 3-jaw concentric chuck ø 125 mm. Central clamping area 3-53mm. Body made of cast metal. High degree of concentricity according to DIN 6386. Includes 3 hardened drilling jaws (stepped on the outside), 3 hardened turning jaws (stepped on the inside), 1 spanner. Note Max. speed 4000 min-¹. Application As adapter chuck in the die-plate chuck PM128 II AirDock.
ER-085839 Erowa OEM Sealing Kit for Blow Off Holes (1 Chuck)
Version Copper wire silvered. Application The kit is used for sealing the blow-off holes.
ER-090744 Erowa OEM Magnetic Clamping Plate Neospark / 250x150x46
Version Magnetic clamping plate made of steel, with two lateral stop bars. Clamping power of the magnet: 100N/cm2. Prepared with 4xM8 boreholes to be fitted to pallet ø148. Application Clamping workpieces magnetically for surface and profile grinding, EDM and high-frequency milling. Recommended minimum workpiece size: 4x4xmm.
ER-093758 Erowa OEM Uniblank C EWIS, Set of 12
Version Brass holder ITS 50 without mounting boreholes. With gripper slots and sealing plate. Application To mount electrodes and workpieces of various shapes. To fit blank Drill mounting boreholes yourself according to requirements. Note Order EWISTM chip (ER-094168) and chucking spigots separately.