248-250-8937
519-999-9723
+1 844 686-0671
ER-033655 Erowa OEM Thread Holder M4
Version Ground 20 mm shaft. Application Defined positioning of threaded EROWA electrodes. Note Systems for M3, M4, M5 and M6.
ER-033656 Erowa OEM Thread Holder M5
Version Ground 20 mm shaft. Application Defined positioning of threaded EROWA electrodes. Note Systems for M3, M4, M5 and M6.
ER-033657 Erowa OEM Thread Holder M6
Version Ground 20 mm shaft. Application Defined positioning of threaded EROWA electrodes. Note Systems for M3, M4, M5 and M6.
ER-034387 Erowa OEM QuickChuck 50
Version System size 50, manual, corrosion‑resistant. Attachment 4 x M8 from the rear or 4 x M6 stud bolts with nuts. Application On EDM/WEDM centers for light milling and grinding work. Max. revolutions on rotating axes 2000 rpm.
ER-034665 Erowa OEM Cover ITS chuck 50
Version Aluminium anodized. Without centering plate. Application Prevents penetration of chips and dirt into the ITS Chuck 50 in combination with the seal ring ER-032832.
ER-034735 Erowa OEM Seal Rapid Action Chuck / ø 72
Version Aluminium anodized. Application Prevents penetration of chips and dirt into the rapid action chuck by application of EROWA Holders ø 72.
ER-035097 Erowa OEM Blank holder ø 20 / ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To clamp cylindrical parts with ø 20 mm.
ER-035114 Erowa OEM Blank holder ø 10 / ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To clamp cylindrical parts with ø 10 mm.
ER-035117 Erowa OEM Blank Holder ø 72 without Borehole, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To clamp cylindrical parts. Mounting Attachment borehole up to max. ø 12 mm to be drilled according to requirements.
ER-035209 Erowa OEM Prisround ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To mount electrodes and workpieces with shafts of up to square 25 mm.
ER-035210 Erowa OEM Uniblank ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To mount electrodes and workpieces of various shapes. Mounting Attachment boreholes to be drilled according to requirements.
ER-035211 Erowa OEM Uniholder ø 72, Set of 6
Version Set of 6 units, system size ITS 50. Without chucking spigots. Application To mount electrodes and workpieces with shaft of up to 20 mm.
ER-035212 Erowa OEM Uniplate ø 72, Set of 6
Version Set of 6 units, includes 12 PinLock locking pins. System size ITS 50, without chucking spigots. Application To mount electrodes and workpieces with surface more than square 40 x 40 mm or ø 50 mm. Mounting With two PinLock locking pins.
ER-035288 Erowa OEM ITS Chuck 100 P with Support
Version Steel, hardened. Clamping power 6000 N. Connections At the rear Operation With control unit. Application On powder presses. To accommodate centering set pallet PM Basic and pallets PM56, PM60 and PM85 Precis
ER-035297 Erowa OEM Collet Chuck Holder ø 72, 1 piece
Version One collet chuck holder with chucking spigot. System size ITS 50. Application To clamp cylindrical parts. Clamping range ø 2 mm - ø 20 mm. Please note Order collet chucks type ETS 32 separately.
ER-035356 Erowa OEM Seal Ring QuickChuck 100 P ø 72
Version Aluminium anodized. Application Prevents penetration of chips and dirt into the QuickChuck 100 P or ITS chuck 100 P by application of EROWA Holders ø 72.
ER-035519 Erowa OEM ITS chuck 100 P 102 x 102
Version Steel, hardened. Clamping power 6000 N. Connections On the side or at the rear, with two lines. Operation With control unit or with air jet. Application For receiving pallets ø 115 / ø 148, electrode holders, pallets PM56, PM60 and PM85 Precise.
ER-036345 Erowa OEM QuickChuck 100P
Version System size 100, manual, stainless. To fit With 4 M8 bolts. Application On lathes, milling, grinding, EDM/WEDM machines, fixtures and dividing heads. Please note Clamping power of up to 10’000 N. Max. speed: 3000 rpm.
ER-036657 Erowa OEM Centering Plate G Inox, Set of 1
Version Centering plate G (ground), rust-resistant, including 8 supporting feet SW13, of which 4 supporting feet with height 10.2mm and 4 with height 11.4mm. Application For workpieces, fixtures and gauges in chip-cutting production. Please note Can also be used to repair older pallet types ø 148 G, for instance ER-015777, ER-015899, ER-032699, etc. To fit a blank According to the fitting instructions supplied.
ER-036658 Erowa OEM Centering Plate G Inox, Set of 5
Version Centering plate G (ground), rust-resistant, including 8 supporting feet SW13, of which 4 supporting feet with height 10.2mm and 4 with height 11.4mm. Application For workpieces, fixtures and gauges in chip-cutting production. Please note Can also be used to repair older pallet types ø 148 G, for instance ER-015777, ER-015899, ER-032699, etc. To fit a blank According to the fitting instructions supplied.
ER-037970 Erowa OEM ITS Chuck 100 P w/o Base Plate
Version Steel, hardened. Clamping power 6000 N. Connections At the rear, with two lines. Operation With control unit. Application For receiving pallets ø 115 / ø 148, electrode holders, pallets PM56, PM60 and PM85 Precise.
ER-038824 Erowa OEM QuickChuck 100 P with Base Plate
Version System size 100, manual, stainless, with base plate. To fit With bolts or clamps. Application On milling, grinding and EDM machines. Please note Clamping power of up to 10000 N.
ER-038826 Erowa OEM QuickChuck 100 P / R
Version On base plate ø 110mm with rotatable flushing connection. To fit With 4 M6 bolts. Application On EDM machines with quill rotation. Please note Clamping power of up to 10’000 N.
ER-043123 Erowa OEM ITS Chuck 100 P Inox w/o Base Plate
Version Steel, hardened, INOX. Clamping power 5000 N. Connections At the rear, with two lines. Operation With control unit