248-250-8937
519-999-9723
+1 844 686-0671
ER-010744 Erowa OEM Chip Guard 50 x 50mm
for rapid-action chuckApplication On Uniplate, Prisround and all other standardholders.
ER-010751 Erowa OEM Chucking Spigot F/M Inox (20 pieces)
Version Fixed type, manual. Bolt stainless, without flushing hole. Set of 20 spigots. Application On RoboSet clamping frames.
ER-010755 Erowa OEM Chucking Spigot F/M EDM for Flushing, Set of 20
Version Manual. M10x45mm bolt, with flushing hole. Application For ITS electrode holders. For EDM and light chip cutting.
ER-010906 Erowa OEM Set of Tools
Application A = Box wrench 8/10 mm for supporting feet M5 B = Key 8 mm for chucking spigot C = Key with handle 4 mm D = Key with handle 3 mm E = Screwdriver for slotted screws in Uniplate F = Open-end wrench 8 mm
ER-011599 Erowa OEM Centering Plate 100 M8, Set of 10
Version Corrosion-resistant, including 4 supporting feet M8 and 4 x M5 screws per plate. Application Workpieces and electrodes. Mounting Mounted directly on plane surface of blank.
ER-011600 Erowa OEM Torque Wrench
Version Torque range 2.5 up to 25 Nm, inc. 3, 4, 5, 6 mm key and one WS 8 mm bit. Application Service and fitting work on ITS system parts.
ER-011803 Erowa OEM Chuck 50 RSA w/o Base Plate
Version Chuck 50 RSA, automatic with pneumatic valve. Clamping power 2800 N. Attachment With 4 M6 bolts from the rear.
ER-013913 Erowa OEM System Stand, Set of 10
Version Plastic, set of 10. Application As a rack for four electrode holders 50 or a pallet ø 115/148 mm.
ER-015465 Erowa OEM Chucking Spigot F/A EDM M10 x 45 for flushing, Set of 20
Version Automatic. M10x45mm bolt, with flushing hole. Application For ITS electrode holders that are changed automatically. For EDM and light chip cutting.
ER-015627 Erowa OEM Square 15 Holder on Adapter ø 85
Version Clamping part fitted to flange, positioned with rods. Application For the construction on multiple fixtures. Mounting From above through the flange into the base.
ER-015629 Erowa OEM Square 25 Holder on Adapter ø 85
Version Clamping part fitted to flange, fixed with rods. Application For the construction on multiple fixtures. Mounting From above through the flange into the base.
ER-019424 Erowa OEM Universal Square Block
Version Steel, hardened, corrosion-resistant. Application For attaching 1 or 2 chucks in horizontal and/or vertical position. Fits ITS chucks, QuickChuck 50, QuickChuck 100. Note Delivery without chucks.
ER-020487 Erowa OEM Compact ITS adapter
Version ITS system size 50, lock with central locking bolt. Prepared to accommodate chip holder for EWIS chip. Operation Tighten central locking bolt. Application System adapter Compact - ITS.
ER-022250 Erowa OEM Adapter pallet ITS 50 / ø 148
Version ITS system size 100. Lock with central M10 locking bolt. Application To accommodate ITS Electrode holders system 50. Lock with central M10 locking bolt. For automatic handling.
ER-022355 Erowa OEM Sealing Ring for Chucking Spigot, Set of 50
Application Set of 50 sealing rings. Sealing between chucking spigot and Rapid-action chuck.
ER-022457 Erowa OEM Support Feet SW 13H M8 x 16, Set of 20
Version Supporting foot SW13, including M8 threaded pin, rust-resistant. Application Replacement of damaged supporting feet on EROWA pallets ø 148 G and on workpieces, fixtures and gauges of your own manufacture. ER-008553: to fit centering plate G. ER-02247: to fit outside centering plate G on older pallet types (for instance ER-015777). ER-008547: to fit centering plate 100 M8 punched, or to fit outside centering plate G on newer pallet types (for instance ER-115308).
ER-029313 Erowa OEM Chip Guard
Version Aluminum. Application Seals the locking mechanism of the QuickChuck 100 P against the penetration of liquids and chips.
ER-029988 Erowa OEM Compact ITS Angle Adapter
Version ITS System size 50, QuickChuck locking mechanism of 90º angle chuck. Operation Quick locking mechanism with lever. Application Systeme adapter Compact - IT
ER-032464 Erowa OEM Microscope with Pointed Checking Pin
Version Amplification factor: 40x Illumination: 5 V, Tansformer: 100-240 V. Application Determination of dimensions for complicated contours. The checking pin with tip serves for adjustment of the optical system.
ER-032731 Erowa OEM Pallet Kit ø 148 MS, Set of 4
Version Standard type, punched centering plates.Application For electrodes and workpieces, and for the construction of fixtures.Mounting Through pallet with M8 bolts or through blank with M10 bolts.
ER-032785 Erowa OEM Square 15 holder EWIS, ITS 100
Version ITS system size 100 Application EDM and chip-cutting processes.
ER-032810 Erowa OEM Square 25 holder EWIS, ITS 100
Version ITS system size 100. Application EDM and chip-cutting processes.
ER-032815 Erowa OEM Collect Chuck Holder 100
Version System size 100 Application For round material up to ø 20 mm.
ER-032832 Erowa OEM Seal Ring ITS Chuck 50
Version Plastic. Application Prevents penetration of chips and dirt into the ITS Chuck 50 by application of EROWA Holders ø 72.